01

Introduction to System of Particles

These system of particles and rotational motion class 11 notes cover the full NCERT chapter for NEET: centre of mass, momentum of a system, torque and angular momentum, equilibrium of a rigid body, moment of inertia and its theorems, rotational dynamics and conservation of angular momentum. Instead of treating a body as a point mass, we now treat an extended body as a collection of particles, each obeying Newton’s laws.

Chapter at a glance
  • Core ideas: centre of mass, rigid body, torque, angular momentum, moment of inertia
  • Key formulas: rcm = Σmiri/M, τ = r × F = Iα, L = Iω, I = Icm + Md², Iz = Ix + Iy
  • Most tested in NEET: moment of inertia of standard bodies, axis theorems, conservation of angular momentum, centre of mass of composite bodies
  • Free PDF: full chapter notes in our study app (link below)

A system of particles is any group of particles whose combined motion is studied as a whole. For NEET, the focus is on rigid bodies, in which the distance between any two particles stays fixed. A rigid body can show pure translation, pure rotation about a fixed axis, or a combination of both. In translation, every point has the same velocity at any instant; in rotation about a fixed axis, every particle moves in a circle around the axis.

Key insight: system of particles and rotational motion class 11 notes rest on one idea, every linear quantity (mass, force, momentum) has a rotational partner (moment of inertia, torque, angular momentum).

02

Centre of Mass (COM)

The centre of mass is the point where the entire mass of a system can be taken as concentrated when studying its translational motion. It depends on how the mass is distributed and need not lie at the geometric centre or even inside the body. These system of particles and rotational motion class 11 notes start every problem by locating it.

COM for a Discrete System
x_cm = (m₁x₁ + m₂x₂ + ... + mₙxₙ) / (m₁ + m₂ + ... + mₙ) r_cm = Σ(mᵢ rᵢ) / M, where M = total mass Two particles: COM lies on the line joining them, closer to the heavier one
Continuous body: r_cm = (1/M) ∫ r dm; x_cm = (1/M) ∫ x dm, y_cm = (1/M) ∫ y dm

For uniform symmetric bodies, the COM lies at the geometric centre. Results to memorise from system of particles and rotational motion class 11 notes:

BodyCOM location
Uniform rodMidpoint (L/2 from either end)
Uniform ring, disc, solid sphereGeometric centre (for a ring, a point with no mass)
Semicircular ring (radius R)2R/π from the centre, on the axis of symmetry
Semicircular disc (radius R)4R/(3π) from the centre, on the axis of symmetry
Solid hemisphere (radius R)3R/8 from the flat face
Hollow hemisphere (radius R)R/2 from the flat face
Tip

For a body with a cavity, use negative mass. Treat the removed part as a particle of negative mass at its own COM and apply the COM formula to the whole body plus this negative mass.

Key insight: system of particles and rotational motion class 11 notes use the COM formula as a weighted average; check your answer lies nearer the heavier part.

03

Motion of COM and Linear Momentum

The key result of this part of the system of particles and rotational motion class 11 notes: the centre of mass moves as if the whole mass of the system were concentrated there and all external forces acted at that point.

Equation of Motion of the COM
M a_cm = F_ext P = Σ mᵢvᵢ = M v_cm and dP/dt = F_ext

Internal forces between particles of the system occur in action–reaction pairs and cancel when added over the whole system, so they cannot change the motion of the COM. Only external forces can, a rule system of particles and rotational motion class 11 notes repeat in every COM problem.

Warning

When a projectile explodes in mid-air, the explosion forces are internal. Until a fragment hits the ground, the only external force is gravity, so the COM of all fragments continues on the original parabolic path. This is a classic NEET trap question.

Impulse on a system: J = F_ext × Δt = ΔP = M(v_cm,final − v_cm,initial)

Key insight: in system of particles and rotational motion class 11 notes, internal forces never move the COM; look only at external forces.

04

Conservation of Linear Momentum

If the net external force on a system is zero, its total linear momentum stays constant, and the COM moves with constant velocity. System of particles and rotational motion class 11 notes list its main applications below.

Conservation Condition
F_ext = 0 ⟹ P_total = constant ⟹ v_cm = constant m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂ (two particles)
  • Recoil of a gun: total momentum is zero before firing, so mgunvgun = mbulletvbullet in magnitude, in opposite directions.
  • Rocket propulsion: exhaust gases thrown backward give the rocket forward momentum; the total momentum of rocket plus gases is conserved.
  • Elastic collision: momentum and kinetic energy are both conserved; in a 1D collision of equal masses, the velocities are exchanged.
  • Perfectly inelastic collision: the bodies stick together, momentum is conserved and the loss of kinetic energy is maximum: (m₁ + m₂)v = m₁u₁ + m₂u₂.
1D elastic collision: v₁ = [(m₁ − m₂)/(m₁ + m₂)]u₁ + [2m₂/(m₁ + m₂)]u₂ v₂ = [2m₁/(m₁ + m₂)]u₁ + [(m₂ − m₁)/(m₁ + m₂)]u₂

Collisions are taught in detail in Work, Energy and Power; the formulas are kept here for quick revision.

Key insight: system of particles and rotational motion class 11 notes apply momentum conservation whenever external forces are zero or negligible during a short event, such as a collision or explosion.

05

Rotation Basics and Linear Analogues

When a rigid body rotates about a fixed axis, every particle moves in a circle in a plane perpendicular to the axis, with its centre on the axis. Particles on the axis stay at rest. This translation–rotation comparison is the backbone of system of particles and rotational motion class 11 notes.

Translational quantityRotational analogueSymbol and unit
Displacement (s)Angular displacementθ (rad)
Velocity (v)Angular velocityω = dθ/dt (rad/s)
Acceleration (a)Angular accelerationα = dω/dt (rad/s²)
Mass (m)Moment of inertiaI (kg m²)
Force (F)Torqueτ = r × F (N m)
Linear momentum (p)Angular momentumL = Iω (kg m²/s)
Kinetic energy (½mv²)Rotational KE½Iω²
Power (Fv)Rotational powerτω

Vector Product

Torque and angular momentum are defined with the vector (cross) product: a × b has magnitude ab sin θ and a direction perpendicular to both vectors, given by the right-hand rule. It is not commutative: a × b = −(b × a), and a × a = 0. System of particles and rotational motion class 11 notes use it for both τ and L.

Linear and angular variables (particle at distance r from the axis): v = ωr (v = ω × r as vectors), a_t = αr, a_c = ω²r = v²/r

Key insight: system of particles and rotational motion class 11 notes become easy once you read every rotational formula as its linear twin with m → I, F → τ, v → ω.

06

Kinematics of Rotational Motion

For rotation about a fixed axis with constant angular acceleration, the equations are exact analogues of the linear equations of motion, as these system of particles and rotational motion class 11 notes show side by side.

Linear → Rotational (constant acceleration)
v = u + at → ω = ω₀ + αt s = ut + ½at² → θ = ω₀t + ½αt² v² = u² + 2as → ω² = ω₀² + 2αθ
Tip

Use θ in radians in these equations. Convert degrees with θ(rad) = θ(°) × π/180, and revolutions with 1 rev = 2π rad.

Key insight: in system of particles and rotational motion class 11 notes, rotational kinematics needs no new method, only the same three equations with θ, ω and α.

07

Torque and Angular Momentum

Torque (moment of force) is the turning effect of a force about a point or axis. It depends on the force, its point of application and its direction, as system of particles and rotational motion class 11 notes define it below.

Torque
τ = r × F, |τ| = rF sin θ = F × (perpendicular distance r⊥) Torque is zero if F = 0, r = 0, or F acts along r (θ = 0° or 180°)

Angular momentum (moment of linear momentum) is the rotational analogue of linear momentum.

Particle: L = r × p, |L| = rp sin θ Rigid body about a fixed axis: L = Iω τ_ext = dL/dt (rotational form of F = dp/dt)
Warning

Torque and angular momentum are axial vectors, with direction given by the right-hand rule. A particle moving in a straight line has angular momentum about any point not on that line, even though it is not rotating.

Key insight: system of particles and rotational motion class 11 notes measure torque with the perpendicular distance; a force through the axis gives no torque however large it is.

08

Equilibrium of a Rigid Body

A rigid body is in mechanical equilibrium when both its linear momentum and angular momentum do not change with time. This section of the system of particles and rotational motion class 11 notes needs two conditions:

Conditions for Equilibrium
Translational equilibrium: ΣF = 0 Rotational equilibrium: Στ = 0 (about any point)
  • Couple: a pair of equal and opposite forces with different lines of action. It produces rotation without translation; its moment is the same about every point. Example: opening a bottle cap or turning a steering wheel.
  • Principle of moments (lever): for a lever in equilibrium, load × load arm = effort × effort arm. Mechanical advantage = load/effort = effort arm/load arm.
  • Centre of gravity: the point where the total gravitational torque on the body is zero. In a uniform gravitational field it coincides with the centre of mass, a point system of particles and rotational motion class 11 notes often test.

Key insight: in system of particles and rotational motion class 11 notes, choose the point for Στ = 0 where an unknown force acts; its torque vanishes and the equation simplifies.

Read the topic? Try the NEET previous year questions from System of Particles and Rotational Motion next, with answers.

Practice System of Particles and Rotational Motion PYQs
09

Moment of Inertia

Moment of inertia (I) is the rotational analogue of mass: it measures how much a body resists a change in its rotational motion. Unlike mass, it depends on the axis and on how the mass is distributed about it, which these system of particles and rotational motion class 11 notes stress throughout.

Definition
I = Σ mᵢrᵢ² (discrete), I = ∫ r² dm (continuous) Unit: kg m², dimensions [ML²] Radius of gyration: I = MK², K = √(I/M)
BodyAxisI
Thin ring (mass M, radius R)Through centre, perpendicular to planeMR²
Thin ringDiameterMR²/2
Circular discThrough centre, perpendicular to planeMR²/2
Circular discDiameterMR²/4
Thin rod (length L)Through centre, perpendicular to rodML²/12
Thin rod (length L)Through one end, perpendicular to rodML²/3
Solid sphereDiameter2MR²/5
Hollow (thin) sphereDiameter2MR²/3
Solid cylinderIts own axisMR²/2
Hollow (thin) cylinderIts own axisMR²
Warning

I changes with the axis. The same disc has I = MR²/2 about its central perpendicular axis but MR²/4 about a diameter. Always state the axis before quoting a value.

Key insight: system of particles and rotational motion class 11 notes rank bodies by where the mass sits; the farther the mass from the axis, the larger I.

10

Theorems of Moment of Inertia

Two theorems give I about other axes once I about a standard axis is known, and system of particles and rotational motion class 11 notes use them in most moment of inertia numericals.

Parallel Axis Theorem
I = I_cm + Md² I_cm = MI about a parallel axis through the COM d = perpendicular distance between the two axes
Perpendicular axis theorem (planar bodies only): I_z = I_x + I_y

x and y lie in the plane of the body; z is perpendicular to it, through their point of intersection.

Tip

The perpendicular axis theorem works only for flat (laminar) bodies; never apply it to a sphere or cylinder. The parallel axis theorem works for all bodies, but one axis must pass through the COM.

Classic application: for a disc, I about a diameter = MR²/4. By the perpendicular axis theorem, I about the central perpendicular axis = MR²/4 + MR²/4 = MR²/2, the standard result in system of particles and rotational motion class 11 notes. For a rod, I about one end = ML²/12 + M(L/2)² = ML²/3 by the parallel axis theorem.

Key insight: in system of particles and rotational motion class 11 notes, use the parallel axis theorem only from the COM axis; going between two non-COM axes needs two steps.

11

Rotational Dynamics, Work and Energy

For rotation about a fixed axis, the net external torque equals the moment of inertia times the angular acceleration. This is Newton’s second law in the form system of particles and rotational motion class 11 notes use for every rotation numerical.

Dynamics of Rotation About a Fixed Axis
τ_net = Iα (analogue of F = ma) Work by a torque: W = ∫ τ dθ = τθ (constant torque) Power: P = τω (analogue of P = Fv) Rotational KE: K = ½Iω²
Work–energy theorem for rotation: W_net = ½I(ω_f² − ω_i²)
Tip

For a wheel slowed by a friction torque, use the work–energy theorem from system of particles and rotational motion class 11 notes: work done by all torques = change in rotational KE.

Key insight: system of particles and rotational motion class 11 notes turn every fixed-axis problem into τ = Iα or energy conservation; pick energy when time is not asked.

12

Conservation of Angular Momentum

When the net external torque on a system is zero, its total angular momentum stays constant. In system of particles and rotational motion class 11 notes this is the rotational twin of momentum conservation.

Conservation of Angular Momentum
τ_ext = 0 ⟹ L = Iω = constant I₁ω₁ = I₂ω₂
  • Ballet dancer or skater: pulling the arms in decreases I, so ω increases; stretching them out does the reverse.
  • Diver: tucking in mid-air reduces I and increases ω, giving more somersaults before reaching the water.
  • Person on a rotating platform: walking from the rim towards the centre decreases I, so the platform speeds up, a favourite example in system of particles and rotational motion class 11 notes.
  • Collapsing star: as its radius shrinks, I falls and ω rises sharply, which is why neutron stars spin so fast.
  • Planet in an elliptical orbit: gravity exerts no torque about the Sun, so the planet moves faster near perihelion and slower near aphelion (Kepler’s second law).

Key insight: in system of particles and rotational motion class 11 notes, if I changes and no external torque acts, write I₁ω₁ = I₂ω₂ immediately; rotational KE is not conserved in these cases.

13

Problem-Solving Framework

NEET numericals from system of particles and rotational motion class 11 notes fall into a few types. Use this table to choose the starting equation.

Problem typeKey equationWatch out for
COM of a composite bodyr_cm = Σmᵢrᵢ / ΣmᵢUse negative mass for cavities
COM after an explosionCOM path unchanged (only gravity external)Internal forces do not shift the COM
Moment of inertiaI = I_cm + Md²; I_z = I_x + I_yStart from the correct standard I and axis
Torque and angular accelerationτ = IαNet torque only; take one sense of rotation as positive
Changing moment of inertiaI₁ω₁ = I₂ω₂External torque must be zero
Equilibrium of a rod or beamΣF = 0, Στ = 0Take torques about a point where an unknown force acts

Key insight: most errors in system of particles and rotational motion class 11 notes numericals come from the wrong axis, so write the axis next to every I and τ.

14

Conceptual Questions

Conceptual questions test understanding rather than formula recall. Try these after reading the system of particles and rotational motion class 11 notes:

  • Can the COM of a body lie outside it? Yes, for a ring, a horseshoe or a doughnut shape.
  • Can a body have angular momentum without rotating? Yes. A particle moving in a straight line has angular momentum about any point not on its line of motion (L = mvr⊥).
  • Why does a spinning top not fall at once? The torque of gravity changes the direction of its angular momentum, so the axis precesses instead of falling.
  • Why are door handles placed far from the hinges? A larger perpendicular distance gives more torque for the same force.
  • Is rotational KE conserved when a skater pulls in her arms? No. L is conserved; KE = L²/2I increases because she does work pulling her arms in.

Key insight: in system of particles and rotational motion class 11 notes, separate what is conserved (L when τ = 0) from what is not (KE) before choosing an option.

15

Common Mistakes

  • Using the perpendicular axis theorem for 3D bodies: it applies only to flat (laminar) objects, not spheres or cylinders.
  • Forgetting the axis when quoting I: a disc has MR²/2 only about the central perpendicular axis; about a diameter it is MR²/4.
  • Applying angular momentum conservation without checking torque: external torque must be zero. Gravity can produce a torque, so verify before writing I₁ω₁ = I₂ω₂.
  • Sign errors in torque: define one sense of rotation as positive and add torques with signs.
  • COM after an explosion: the COM does not shift; with only gravity acting, it keeps the original trajectory.
  • Radius of gyration vs radius: K is defined by I = MK² and equals the physical radius R only when I = MR² (ring, thin hollow cylinder).

Key insight: read this list before each test; these are the most common ways marks are lost on system of particles and rotational motion class 11 notes topics.

16

How NEET Tests This Chapter

NEET questions on this chapter come in a few recurring formats. Plan your practice from the system of particles and rotational motion class 11 notes around them.

Question typeWhat it checks
Moment of inertiaStandard values, radius of gyration, parallel and perpendicular axis theorems.
Conservation of angular momentumChanging I (skater, platform, two discs joined) and the resulting ω and KE.
Torque and τ = IαAngular acceleration of wheels, pulleys and rods; torque as r × F.
Centre of massCOM of composite or cut-out bodies, motion of COM after explosions.
Equilibrium of rigid bodiesBeams and ladders, principle of moments, couples.

Once you finish these notes, practise System of Particles and Rotational Motion NEET PYQs here, free and with answers.

Key insight: pair each PYQ set with the matching section of these system of particles and rotational motion class 11 notes; moment of inertia first, then angular momentum.

17

Rolling Motion and Energy in Rolling

Note

Rolling motion and kinetic energy of rolling have been removed from the current NEET syllabus. They are kept here briefly for background, so give them the least revision time.

Rolling is a combination of translation of the COM and rotation about the COM. In pure rolling (no slipping) the contact point is momentarily at rest, as older system of particles and rotational motion class 11 notes explain.

Pure Rolling
v_cm = Rω, a_cm = Rα Contact point: 0; centre: v_cm; top point: 2v_cm KE = ½mv_cm²(1 + K²/R²) Down an incline: a = g sin θ / (1 + K²/R²), v = √[2gh / (1 + K²/R²)]
Rolling bodyK²/R²KE_rot / KE_totalv at bottom (height h)
Ring / hollow cylinder150%√(gh)
Solid cylinder / disc1/233%√(4gh/3)
Hollow sphere2/340%√(6gh/5)
Solid sphere2/529%√(10gh/7)

Down the same incline the order of arrival is solid sphere, solid cylinder, hollow sphere, ring, independent of mass and radius. Static friction makes pure rolling possible but does no work, because the contact point does not move.

Key insight: rolling is no longer in the NEET syllabus, so give this part of the system of particles and rotational motion class 11 notes the least revision time.

18

Summary: System of Particles Class 11 Notes

Use this checklist from the system of particles and rotational motion class 11 notes for revision before a test.

Revision Checklist – System of Particles and Rotational Motion Class 11 Notes
  • COM: rcm = Σmiri/M; at the geometric centre for uniform symmetric bodies.
  • COM moves as if all external forces act on the total mass M placed there: Macm = Fext.
  • Total momentum P = Mvcm; conserved when Fext = 0.
  • v = ωr; ω = dθ/dt; α = dω/dt; rotational equations mirror linear ones.
  • Torque τ = r × F; angular momentum L = r × p = Iω; τ = dL/dt.
  • Equilibrium: ΣF = 0 and Στ = 0; a couple gives rotation without translation.
  • I = Σmiri² depends on the axis; ring MR², disc MR²/2, solid sphere 2MR²/5, rod (centre) ML²/12.
  • Parallel axis: I = Icm + Md²; perpendicular axis: Iz = Ix + Iy (laminar bodies only).
  • τ = Iα; W = τθ; P = τω; K = ½Iω².
  • L = Iω is conserved when τext = 0: I₁ω₁ = I₂ω₂.

Frequently Asked Questions – System of Particles and Rotational Motion Class 11

What is the difference between moment of inertia and mass in rotational motion?
Mass is the measure of resistance to linear (translational) acceleration under a net force (F = ma). Moment of inertia (I) is the analogous quantity for rotational motion — it measures resistance to angular acceleration under a net torque (τ = Iα). The key distinction is that while mass is an intrinsic scalar property of a body, moment of inertia depends on both the mass and the distribution of that mass relative to a chosen axis of rotation. The same body has different values of I for different axes.
Why does a solid sphere reach the bottom of an incline before a hollow sphere?
When rolling down an incline, a portion of the potential energy converts to translational KE and the rest to rotational KE. The fraction going to rotation is I/(I + MR²). A solid sphere has I = 2MR²/5, giving a ratio of 2/7 ≈ 29% to rotation. A hollow sphere has I = 2MR²/3, giving 2/5 = 40% to rotation. Since the solid sphere devotes less energy to spinning, more goes into translational speed — it reaches the bottom faster. This result is independent of mass and radius. Note: rolling motion is no longer in the current NEET syllabus.
How can the centre of mass lie outside the body?
The COM is a weighted average of mass positions and is not required to lie within the physical boundaries of the body. For a uniform ring or hollow cylinder, all mass lies at radius R from the centre — the centre itself is empty space, yet that is exactly where the COM is located. Similarly, a boomerang or horseshoe has its COM in the hollow interior region. Any body with a hole or concave shape where mass is absent near the geometric centre can have its COM in empty space.
Does friction do work in pure rolling motion?
No. In pure rolling without slipping, the contact point between the rolling body and the surface has zero instantaneous velocity. Since the point of application of the static friction force has zero velocity, the work done by friction is zero (W = F × displacement of point of application = 0). However, friction is still essential — it provides the torque necessary to maintain the rolling constraint. Without friction, the body would slide rather than roll. Note: rolling motion is no longer in the current NEET syllabus.
How is angular momentum conservation applied in the System of Particles and Rotational Motion class 11 notes?
Angular momentum is conserved when the net external torque on the system is zero. The law states L = Iω = constant in such situations. A classic example is a dancer who spins with arms outstretched (large I, small ω) and then pulls arms in (smaller I). Since Iω must remain constant, ω increases — the dancer spins faster. For NEET, identify that no external torque acts, then write I₁ω₁ = I₂ω₂ and solve for the unknown angular velocity or moment of inertia.
What is the perpendicular axis theorem and when can it be used?
The perpendicular axis theorem states that for a laminar (flat, 2D) body, the moment of inertia about an axis perpendicular to its plane equals the sum of moments of inertia about two mutually perpendicular axes lying in the plane: I_z = I_x + I_y. This theorem is strictly limited to planar (2D) objects such as discs, rings, rectangular sheets, and triangular plates. It cannot be applied to three-dimensional bodies like spheres, cylinders, or cones.
Where can I download system of particles and rotational motion class 11 notes PDF?
The complete system of particles and rotational motion class 11 notes PDF is free in our NEET study app. Open the app here and use code DOCTOR to unlock the free study material.
Where can I practise NEET previous year questions on System of Particles and Rotational Motion?
You can practise System of Particles and Rotational Motion NEET PYQs here, free and with answers. Start with moment of inertia and axis-theorem questions, then move to conservation of angular momentum and centre of mass.