01

Introduction to Waves Class 11 Notes

These Waves class 11 notes cover one of the most important chapters in NEET Physics. A wave is a disturbance that travels through a medium, carrying energy and momentum from one point to another without carrying the matter itself. Ripples in a pond, the sound of a voice and the vibration of a guitar string are all waves. This chapter builds directly on oscillations and simple harmonic motion.

Chapter at a glance
  • Core ideas: transverse and longitudinal waves, progressive wave equation, wave speed, superposition, reflection, standing waves, organ pipes, beats
  • Key formulas: v = νλ, y = A sin(kx − ωt + φ), v = √(T/μ), v = √(γP/ρ), νₙ = nv/2L, ν(beat) = |ν₁ − ν₂|
  • Most tested in NEET: string and pipe harmonics, speed of waves, beats, reading the wave equation
  • Free PDF: full chapter notes in our study app (link below)

Key insight: Waves class 11 notes describe energy moving through a medium while each particle only oscillates about its own mean position.

02

Classification and Types of Waves

Waves are classified by whether they need a medium and by the direction in which particles oscillate. This distinction is vital for conceptual questions.

  • Mechanical waves: need a material medium (solid, liquid or gas). Examples: sound waves and waves on a string.
  • Electromagnetic waves: do not need a medium and can travel through a vacuum. Examples: light, X-rays and radio waves.
  • Matter waves: associated with moving particles such as electrons (studied later in modern physics).
FeatureTransverse wavesLongitudinal waves
Particle vibrationPerpendicular to the direction of travelParallel to the direction of travel
FormCrests and troughsCompressions and rarefactions
Mechanical mediumSolids (and the surface of liquids); needs shear modulusSolids, liquids and gases
ExampleWaves on a plucked stringSound waves in air

Key insight: in Waves class 11 notes, mechanical transverse waves need a medium that resists shear, which is why they cannot travel through gases.

03

Wave Terminology and Parameters

You need the basic language used to describe every wave.

Fundamental Wave Equation
v = νλ = λ/T = ω/k
  • Wavelength (λ): the distance between two consecutive points in the same phase, e.g. crest to crest.
  • Frequency (ν): the number of oscillations per second. Unit: hertz (Hz).
  • Time period (T): the time for one complete oscillation; T = 1/ν.
  • Amplitude (A): the maximum displacement of a particle from its mean position.
Tip

Frequency is a property of the source. When a wave passes from one medium to another, its speed and wavelength change, but its frequency stays the same.

Key insight: in Waves class 11 notes, v = νλ links every wave quantity, so most numericals start with it.

04

Equation of a Progressive Wave and Phase

A progressive (travelling) wave moves forward through a medium. For a sinusoidal wave travelling along the positive x-axis, the displacement of a particle at position x and time t is:

Progressive Wave Equation
y(x, t) = A sin(kx − ωt + φ) k = 2π/λ (angular wave number); ω = 2πν (angular frequency) For a wave moving along −x: y = A sin(kx + ωt + φ)

Phase and path difference

The phase (kx − ωt + φ) describes the state of motion of a particle: both its position and its direction of motion. Particles one wavelength apart are in phase; their phase difference is a multiple of 2π.

Δφ = (2π/λ) × Δx

Δx is the path difference between the two points.

Key insight: Waves class 11 notes read the wave equation directly: the coefficient of x gives k, the coefficient of t gives ω, and v = ω/k.

05

Speed of a Wave on a Stretched String

The speed of a mechanical wave depends on the inertial (mass) and elastic (restoring) properties of the medium. This is a high-yield topic in Waves class 11 notes.

v = √(T/μ)

T is the tension in the string and μ is its linear mass density (mass per unit length).

Warning

Do not confuse linear mass density (μ) with the volume density (ρ) of the material. μ = M/L.

The speed depends only on the properties of the string, not on the frequency of the wave.

Key insight: in Waves class 11 notes, quadrupling the tension doubles the wave speed on a string.

06

Speed of a Longitudinal Wave (Sound)

For longitudinal waves, the elastic property is the bulk modulus (in fluids) or Young’s modulus (in a solid rod).

Speed of Sound
In a fluid: v = √(B/ρ) In a solid rod: v = √(Y/ρ) Newton (isothermal): v = √(P/ρ) ≈ 280 m/s in air at STP Laplace correction (adiabatic): v = √(γP/ρ) ≈ 331 m/s in air at STP
  • Sound travels fastest in solids and slowest in gases.
  • At constant temperature, the speed of sound in a gas does not depend on pressure.
  • The speed of sound increases with temperature: v ∝ √T (T in kelvin).
Tip

Newton assumed the compressions and rarefactions were isothermal. Laplace pointed out they happen too fast for heat to flow, so they are adiabatic. That is why γ appears in the corrected formula.

Key insight: Waves class 11 notes use Laplace’s √(γP/ρ) for sound in air; Newton’s formula gives a value about 15% too low.

07

Principle of Superposition and Interference

The principle of superposition states that when two or more waves overlap, the resultant displacement is the algebraic sum of the individual displacements: y = y₁ + y₂. This leads to interference.

Resultant amplitude: A = √(A₁² + A₂² + 2A₁A₂ cos φ)

For two identical waves of amplitude a with phase difference φ: A = 2a cos(φ/2).

TypePhase difference (Δφ)Resultant amplitude
Constructive2nπ (0, 2π, 4π…)A(max) = A₁ + A₂
Destructive(2n + 1)π (π, 3π, 5π…)A(min) = |A₁ − A₂|

Intensity is proportional to the square of the amplitude (I ∝ A²), so in constructive interference of two identical waves, the intensity becomes four times that of one wave.

Key insight: in Waves class 11 notes, amplitudes add with the cos φ term, but intensities follow the square of the resultant amplitude.

Read the topic? Try the NEET previous year questions from Waves next, with answers.

Practice Waves PYQs
08

Reflection of Waves

When a wave meets a boundary, it is reflected. What happens to its phase depends on the boundary, a detail that explains standing waves.

  • Rigid boundary (fixed end of a string): the reflected wave has a phase change of π, so a crest returns as a trough. The boundary is a node.
  • Open boundary (free end, or the open end of a pipe): the reflected wave has no phase change. The boundary is an antinode.

Key insight: in Waves class 11 notes, a fixed end always gives a node and a free end always gives an antinode.

09

Standing Waves on Strings

When two identical waves travelling in opposite directions interfere, they form a standing (stationary) wave. Unlike progressive waves, standing waves do not carry energy along the medium.

Standing Wave
y(x, t) = 2a sin kx cos ωt Nodes at x = nλ/2; antinodes at x = (n + ½)λ/2
  • Nodes: points of zero amplitude.
  • Antinodes: points of maximum amplitude.
  • Adjacent nodes (or antinodes) are λ/2 apart; a node and the next antinode are λ/4 apart.

String fixed at both ends

λₙ = 2L/n νₙ = nv/2L (n = 1, 2, 3, …)

The lowest frequency (n = 1) is the fundamental mode, or first harmonic. All integer harmonics are present.

Key insight: in Waves class 11 notes, a string fixed at both ends has a node at each end and supports every harmonic.

10

Standing Waves in Organ Pipes

Air columns also support standing waves. Organ pipe questions are among the most common in Waves class 11 notes.

FeatureClosed pipe (one end closed)Open pipe (both ends open)
EndsNode at the closed end, antinode at the open endAntinodes at both ends
Frequenciesνₙ = (2n − 1)v/4Lνₙ = nv/2L
Fundamentalv/4Lv/2L
Harmonics presentOnly odd harmonics (1, 3, 5…)All harmonics (1, 2, 3…)
Tip

An open pipe’s fundamental is twice that of a closed pipe of the same length.

Key insight: Waves class 11 notes sum up pipes in one rule: closed pipes play only odd harmonics.

11

The Beats Phenomenon

Beats occur when two sound waves of slightly different frequencies ν₁ and ν₂ are heard together. The listener hears a sound whose loudness rises and falls periodically.

ν(beat) = |ν₁ − ν₂|

Beats are clearly heard only when the difference is small, roughly less than 10 Hz.

Musicians use beats to tune instruments: they adjust the string until the beats disappear. Loading a tuning fork with wax lowers its frequency; filing it raises its frequency. These tricks decide the sign in beat numericals.

Key insight: Waves class 11 notes solve beat problems by checking how the beat count changes when one fork is loaded or filed.

12

How NEET Tests This Chapter

NEET questions from Waves class 11 notes are mostly short numericals on harmonics, wave speed and beats.

Question typeWhat to use
Reading a wave equationk, ω, v = ω/k, direction of travel
Speed on a string or in a gasv = √(T/μ), v = √(γP/ρ), v ∝ √T
String harmonicsνₙ = nv/2L
Organ pipesOpen: nv/2L; closed: (2n − 1)v/4L
Beats|ν₁ − ν₂|, loading and filing
SuperpositionResultant amplitude and intensity

Once the formulas are clear, practise Waves NEET PYQs here, free and with answers.

Key insight: Waves class 11 notes pay off fastest when you can draw the first three modes of a string, an open pipe and a closed pipe.

13

Common Mistakes to Avoid

These are the errors that most often cost marks when students revise Waves class 11 notes in a hurry.

Warning

Harmonics vs overtones: in a closed pipe, the first overtone is the third harmonic. Always check the naming before writing n.

Warning

Path difference units: keep the path difference and the wavelength in the same units (metres or centimetres) before finding the phase.

Warning

Assuming frequency changes when a wave enters a new medium. Only the speed and wavelength change.

Warning

Thinking pressure changes the speed of sound in a gas at constant temperature. It does not.

14

Doppler Effect in Sound

Note

The Doppler effect has been removed from the current NEET syllabus. It is kept here briefly for background, so give it the least revision time.

The apparent change in the frequency of sound due to relative motion between the source and the observer is called the Doppler effect.

General Doppler Formula
ν' = ν₀ (v ± v₀) / (v ∓ vₛ) v = speed of sound, v₀ = observer's speed, vₛ = source's speed

Take the upper signs when the source and the observer move towards each other (the apparent frequency increases).

Key insight: the Doppler effect now sits at the edge of Waves class 11 notes, so give it the least revision time.

15

Summary: Waves Class 11 Notes

Waves carry energy without carrying matter. Their speed depends on the medium, they add by superposition, they form standing waves between boundaries, and two close frequencies produce beats. Use this checklist from the Waves class 11 notes for last-minute revision.

Revision Checklist – Waves Class 11 Notes
  • Wave equation: v = νλ is the heart of wave kinematics.
  • Mechanical transverse waves travel only in solids and on the surface of liquids.
  • Longitudinal waves (sound) travel in solids, liquids and gases.
  • Laplace correction for sound in air: v = √(γP/ρ).
  • Intensity of a wave is proportional to the square of its amplitude (I ∝ A²).
  • String fixed at both ends: νₙ = nv/2L (all harmonics).
  • Closed organ pipes produce only odd harmonics; fundamental v/4L.
  • Open organ pipes produce all harmonics; fundamental v/2L.
  • The distance between a node and the adjacent antinode is λ/4.
  • Beat frequency = |ν₁ − ν₂|.
Download Waves Class 11 Notes PDF Free in our study app – use code DOCTOR

Frequently Asked Questions – Waves Class 11

What is the difference between a progressive and a standing wave?
Progressive waves advance through the medium and transfer energy. Standing waves remain confined between boundaries and do not transfer energy along the medium; the energy stays stored between the nodes.
Does the speed of sound change with pressure?
No, at a constant temperature, the speed of sound is independent of pressure. This is because any increase in pressure is accompanied by a proportional increase in density, keeping the ratio P/ρ constant.
What are beats used for in real life?
Beats are commonly used by musicians to tune instruments. When the frequencies of two instruments match, the beat frequency becomes zero.
Why do we hear echoes only in large rooms?
To hear a distinct echo, the reflected sound must reach the ear at least 0.1 seconds after the original sound. At about 344 m/s, this needs the reflecting surface to be at least about 17.2 metres away.
How does temperature affect the speed of sound?
The speed of sound is directly proportional to the square root of the absolute temperature (v ∝ √T). As temperature increases, the speed of sound increases.
Where can I download waves class 11 notes PDF?
The complete Waves class 11 notes PDF is free in our NEET study app. Open the app here and use code DOCTOR.
Where can I practise NEET previous year questions on Waves?
You can practise Waves NEET previous year questions here, free and with answers. Start with string and organ pipe harmonics, then move to wave speed and beats.