01

Introduction to Motion in a Plane

These Motion in a Plane class 11 notes take motion from a single straight line into a two-dimensional plane, and that shift needs a new mathematical tool: vectors. When an object moves along a straight line, one number with a sign (+ or −) describes it fully. When it moves along a curved path, such as a ball thrown into the air, a boat crossing a river or a satellite orbiting the Earth, you need both magnitude and direction. That is why Motion in a Plane class 11 notes begin with vectors.

Chapter at a glance
  • Core ideas: scalars and vectors, resolution into components, vector addition, dot and cross products, relative velocity, projectile motion, uniform circular motion
  • Key formulas: R = √(A² + B² + 2AB cos θ), T = 2u sin θ/g, H = u² sin²θ/2g, R = u² sin 2θ/g, a(c) = v²/r = ω²r
  • Most tested in NEET: projectile range, height and time, resultant of two vectors, river–boat problems, centripetal acceleration
  • Free PDF: full chapter notes in our study app (link below)

This chapter lays the foundation for two of the most important topics in NEET Physics: projectile motion and uniform circular motion. Nearly every derivation and numerical in it comes back to one core skill: resolving a vector into perpendicular components along the x and y axes.

Tip

Strong vector skills from this chapter also carry you through Laws of Motion, Work, Energy and Power, and Rotational Motion.

Key insight: Motion in a Plane class 11 notes turn every 2D problem into two 1D problems, one along x and one along y.

02

Scalars and Vectors

The most basic distinction in Motion in a Plane class 11 notes is between scalar and vector quantities.

FeatureScalarVector
DefinitionMagnitude onlyMagnitude and direction
ExamplesMass, temperature, distance, speed, energyDisplacement, velocity, acceleration, force
NotationPlain symbol: m, TBold or with an arrow: A or A⃗
Addition ruleOrdinary algebraTriangle or parallelogram law
Negative signValue below zero (e.g. −5 °C)Opposite direction
Warning

Speed is a scalar; velocity is a vector. Distance is a scalar; displacement is a vector. NEET often tests this distinction, so never use them interchangeably.

Key insight: Motion in a Plane class 11 notes rest on this table, because only vectors need the special addition rules that follow.

03

Equality, Null Vector and Multiplication by a Number

  • Equal vectors: two vectors are equal only if they have the same magnitude and the same direction. Shifting a vector parallel to itself does not change it.
  • Null (zero) vector: a vector of zero magnitude, written 0⃗. Its direction cannot be specified. A + 0 = A, and A − A = 0. Motion in a Plane class 11 notes use it as the result of subtracting a vector from itself.
  • Multiplying by a real number λ: λA has magnitude |λ|A. If λ is positive, the direction stays the same; if λ is negative, the direction reverses.
−A has the same magnitude as A but points the opposite way

Multiplying a velocity by a time gives a displacement: the factor can carry its own units.

Key insight: in Motion in a Plane class 11 notes, a negative multiplier only flips direction; it never makes a magnitude negative.

04

Resolution of Vectors: Components and Unit Vectors

Any vector in a 2D plane can be fully described by its rectangular components along the x and y axes. This is the most powerful technique in Motion in a Plane class 11 notes.

Unit vectors

In Motion in a Plane class 11 notes, a unit vector has magnitude exactly 1 and only shows direction. It has no units or dimensions.

  • î – unit vector along the positive x-axis
  • ĵ – unit vector along the positive y-axis
  • k̂ – unit vector along the positive z-axis (for 3D)
Vector in Component Form
A = Aₓ î + Aᵧ ĵ Aₓ = A cos θ Aᵧ = A sin θ |A| = √(Aₓ² + Aᵧ²) θ = tan⁻¹(Aᵧ/Aₓ) [angle with x-axis]

The components let you split any 2D problem into two independent 1D problems, one along x and one along y.

Tip

Choose axes so that as many vectors as possible lie along one axis. This cuts down the number of components you need to calculate and reduces arithmetic errors.

Key insight: Motion in a Plane class 11 notes use Aₓ = A cos θ and Aᵧ = A sin θ more than any other formula in the chapter.

05

Vector Addition and Subtraction

Adding vectors correctly is the core skill of Motion in a Plane class 11 notes.

Graphical methods

  • Triangle law: place the tail of the second vector at the head of the first. The resultant runs from the tail of the first to the head of the second.
  • Parallelogram law: place both vectors tail to tail. The diagonal of the parallelogram they form, starting from the common tail, is the resultant.

Vector addition is commutative (A + B = B + A) and associative ((A + B) + C = A + (B + C)).

Resultant of two vectors at angle θ

Analytical Method
R = √(A² + B² + 2AB cos θ) tan α = B sin θ / (A + B cos θ) [α = angle of R with A] R(max) = A + B at θ = 0°; R(min) = |A − B| at θ = 180°

Component method

This is the method used in most numericals. Add the corresponding components separately:

Rₓ = A₁ₓ + A₂ₓ Rᵧ = A₁ᵧ + A₂ᵧ R = √(Rₓ² + Rᵧ²) tan θ = Rᵧ/Rₓ

Vector subtraction

Subtraction means adding the negative vector: A − B = A + (−B). In component form, Rₓ = Aₓ − Bₓ and Rᵧ = Aᵧ − Bᵧ. The magnitude of A − B is √(A² + B² − 2AB cos θ).

Key insight: Motion in a Plane class 11 notes show the resultant of two vectors always lies between |A − B| and A + B.

06

Multiplication of Vectors: Dot and Cross Product

Two types of vector multiplication appear in Motion in a Plane class 11 notes. Knowing when to use each is important for NEET.

Scalar (dot) product

The dot product gives a scalar. It measures how much of one vector lies along another.

Dot Product
A · B = AB cos θ = AₓBₓ + AᵧBᵧ + A_zB_z W = F · d = Fd cos θ [work is a dot product] θ = 90° → A · B = 0 (perpendicular); θ = 0° → A · B = AB (parallel)

Vector (cross) product

The cross product gives a vector perpendicular to both original vectors, with its direction given by the right-hand rule.

Cross Product
|A × B| = AB sin θ τ = r × F [torque is a cross product] θ = 0° → |A × B| = 0 (parallel); θ = 90° → |A × B| = AB (maximum)
PropertyDot productCross product
Result typeScalarVector
FormulaAB cos θAB sin θ
Commutative?Yes: A · B = B · ANo: A × B = −(B × A)
Unit vectorsî · î = 1, î · ĵ = 0î × ĵ = k̂, î × î = 0
ApplicationWork, powerTorque, angular momentum

Key insight: in Motion in a Plane class 11 notes, a zero dot product means perpendicular vectors and a zero cross product means parallel vectors.

07

Position, Displacement and Velocity in a Plane

Position, displacement and velocity are extended to two dimensions in Motion in a Plane class 11 notes by writing them as vectors in component form.

Position and Displacement
r = x î + y ĵ [position vector] Δr = r₂ − r₁ = (x₂ − x₁) î + (y₂ − y₁) ĵ [displacement]
Velocity Components
v = dr/dt = vₓ î + vᵧ ĵ vₓ = dx/dt vᵧ = dy/dt |v| = √(vₓ² + vᵧ²) tan θ = vᵧ/vₓ

The direction of velocity at any point is along the tangent to the path at that point. On a curved path, even if the speed stays constant, the direction of velocity changes, and that change in direction is itself an acceleration.

Key insight: Motion in a Plane class 11 notes treat velocity as always tangent to the path, which is the starting point for circular motion.

08

Acceleration and Motion with Constant Acceleration

Acceleration is the rate of change of velocity. In two dimensions it can have a part along the motion (changing the speed) and a part perpendicular to it (changing the direction). Motion in a Plane class 11 notes treat both parts with the same component method.

Acceleration Components
a = dv/dt = aₓ î + aᵧ ĵ aₓ = dvₓ/dt aᵧ = dvᵧ/dt |a| = √(aₓ² + aᵧ²)

Motion in a plane with constant acceleration

When a is constant, the straight-line equations of motion apply separately along each axis:

v = v₀ + a t r = r₀ + v₀ t + ½ a t² x = x₀ + v₀ₓ t + ½ aₓ t² y = y₀ + v₀ᵧ t + ½ aᵧ t²
Tip

In projectile motion, aₓ = 0 and aᵧ = −g. The horizontal motion is uniform and the vertical motion is uniformly accelerated: two independent 1D problems.

Key insight: Motion in a Plane class 11 notes apply each 1D equation of motion separately along x and y; the two never mix.

Read the topic? Try the NEET previous year questions from Motion in a Plane next, with answers.

Practice Motion in a Plane PYQs
09

Relative Velocity in Two Dimensions

Relative velocity is the last vector topic in Motion in a Plane class 11 notes. The velocity of an object measured by an observer who is also moving is its relative velocity. In Motion in a Plane class 11 notes, this idea is used in river–boat and rain–umbrella problems.

Relative Velocity
v(AB) = v(A) − v(B) [velocity of A relative to B] v(BA) = −v(AB)

River–boat problems

A boat moves with velocity v(b) relative to the water, and the river flows with velocity v(r). The boat’s velocity relative to the ground is the vector sum v(b) + v(r). For a river of width d:

GoalHow to head the boatResult
Cross in minimum timePerpendicular to the bankt = d/v(b); drift = v(r)·d/v(b)
Reach the point directly oppositeUpstream at angle θ to the perpendicular, sin θ = v(r)/v(b)t = d/√(v(b)² − v(r)²); needs v(b) > v(r)
Warning

Always ask “relative to what?” The velocity of rain relative to a running person is different from its velocity relative to the ground. Forgetting the reference frame is the most common error here.

Key insight: Motion in a Plane class 11 notes solve every relative velocity problem with one vector subtraction, drawn as a triangle.

10

Projectile Motion: Complete Formula Sheet

Projectile motion is one of the most important topics in Motion in a Plane class 11 notes for NEET. A projectile is an object thrown into the air with some initial velocity that then moves under gravity alone, with air resistance neglected.

Component breakdown

At t = 0, a projectile is launched with speed u at angle θ above the horizontal. Its motion splits into two independent parts:

Projectile Motion: Component Equations
Horizontal (uniform, aₓ = 0): vₓ = u cos θ (constant); x = (u cos θ) t Vertical (uniformly accelerated, aᵧ = −g): vᵧ = u sin θ − gt; y = (u sin θ) t − ½ g t²

Key derived results

Time of Flight, Maximum Height, Range
T = 2u sin θ / g [total time of flight] H = u² sin²θ / 2g [maximum height] R = u² sin 2θ / g [horizontal range] R(max) = u²/g at θ = 45°

Equation of trajectory

Eliminating t from the horizontal and vertical equations gives the path of the projectile:

y = x tan θ − g x² / (2u² cos²θ)

This is a parabola, the standard trajectory of a projectile.

Complementary angles

Two launch angles that add up to 90° give the same horizontal range. A projectile launched at 30° and another at 60°, with the same speed on level ground, land at the same distance; the 60° one goes higher and stays in the air longer.

QuantityFormulaMaximum at θ =
Range Ru² sin 2θ / g45°
Height Hu² sin²θ / 2g90°
Time T2u sin θ / g90°
Horizontal velocityu cos θ0° (horizontal launch)

Horizontal projection from a height h

For a body thrown horizontally with speed u from a height h, time of flight t = √(2h/g) and horizontal range R = u√(2h/g). The time does not depend on u, a favourite trap in Motion in a Plane class 11 notes.

Key insight: Motion in a Plane class 11 notes link all projectile results to the vertical motion: the time of flight sets everything else.

11

Uniform Circular Motion

In uniform circular motion, an object moves along a circle with constant speed. The direction of its velocity changes all the time, so the object is always accelerating even though its speed does not change.

Centripetal acceleration

This acceleration always points towards the centre of the circle (centripetal means centre-seeking). It comes purely from the change in direction, not from any change in speed. Motion in a Plane class 11 notes derive it from the changing velocity vector.

Uniform Circular Motion Formulas
v = ωr [linear and angular speed] a(c) = v²/r = ω²r = 4π²ν²r [centripetal acceleration] T = 2πr/v = 2π/ω [time period]; ν = 1/T [frequency]
Warning

The velocity vector is always tangential (perpendicular to the radius), and the centripetal acceleration is always radially inward. The two are always perpendicular in uniform circular motion. Because its direction keeps changing, centripetal acceleration is not a constant vector.

Key insight: Motion in a Plane class 11 notes stress that constant speed in a circle never means zero acceleration.

12

Solved Numerical Examples

These three examples cover the main formula types in Motion in a Plane class 11 notes.

Example 1: Resultant vector

Problem: Two vectors A = 3î + 4ĵ and B = 2î − ĵ. Find the magnitude and direction of R = A + B.

Rₓ = 3 + 2 = 5; Rᵧ = 4 + (−1) = 3 |R| = √(5² + 3²) = √34 ≈ 5.83 units θ = tan⁻¹(3/5) ≈ 31° with the x-axis

Example 2: Projectile motion

Problem: A ball is projected at u = 20 m/s and θ = 30°. Find T, H and R (g = 10 m/s²).

T = (2 × 20 × sin 30°)/10 = (2 × 20 × 0.5)/10 = 2 s H = (20² × sin²30°)/(2 × 10) = (400 × 0.25)/20 = 5 m R = (20² × sin 60°)/10 = (400 × 0.866)/10 ≈ 34.6 m

Example 3: Centripetal acceleration

Problem: A car moves in a circle of radius 50 m at a speed of 10 m/s. Find its centripetal acceleration.

a(c) = v²/r = 10²/50 = 100/50 = 2 m/s²

Direction: towards the centre of the circular path.

Key insight: Motion in a Plane class 11 notes numericals follow one pattern: write components, apply the formula, then find the direction.

13

Practice Questions

Try these questions after revising Motion in a Plane class 11 notes.

Conceptual questions

  1. Can a vector have zero magnitude if one of its components is non-zero? Justify your answer.
  2. A ball is thrown horizontally from a cliff. Does it undergo projectile motion? Identify the horizontal and vertical components of its motion.
  3. In uniform circular motion, why is the object said to be accelerating even though its speed is constant?
  4. Two projectiles are launched with the same initial speed at 40° and 50°. Compare their ranges and heights.
  5. What is the direction of centripetal acceleration? Can it ever be tangential?

Numerical questions

  1. Find the resultant of P = 5î + 2ĵ and Q = −3î + 4ĵ. Find its magnitude and angle with the x-axis.
  2. A projectile is fired with u = 40 m/s at 45°. Calculate R, H and T (g = 10 m/s²).
  3. A particle moves in a circle of radius 0.5 m with a period of 2 s. Find its speed, centripetal acceleration and angular velocity.
  4. A boat moves at 5 m/s in still water across a river flowing at 3 m/s. If the boat is aimed perpendicular to the bank, find its actual speed and the angle of drift.

Key insight: solve these Motion in a Plane class 11 notes questions without looking at the formulas first, then check against the formula sheet.

14

How NEET Tests This Chapter

NEET questions from Motion in a Plane class 11 notes are usually direct formula applications, with some conceptual questions on vectors and circular motion.

Question typeWhat to use
Range, height, time of flightT, H, R formulas; complementary angles
Equation of trajectoryy = x tan θ − gx²/(2u² cos²θ)
Resultant of two vectorsR = √(A² + B² + 2AB cos θ), components
Dot and cross productAngle between vectors, perpendicular or parallel test
River–boat and rain problemsRelative velocity triangle
Circular motiona(c) = v²/r = ω²r, direction of v and a
Tip

Learn the T, H and R formulas with their derivations. If you understand why they work, you will never confuse sin θ, sin²θ and sin 2θ.

Once the formulas are clear, practise Motion in a Plane NEET PYQs here, free and with answers.

Key insight: Motion in a Plane class 11 notes pay off fastest when you master projectile formulas first, then vectors.

15

Common Mistakes to Avoid

These are the errors that most often cost marks when students revise Motion in a Plane class 11 notes in a hurry.

Warning

Adding vectors as scalars: never add the magnitudes of two vectors directly unless they are parallel. Resolve into components first, then add Rₓ and Rᵧ separately.

Warning

Confusing sin θ, sin²θ and sin 2θ: R uses sin 2θ = 2 sin θ cos θ, H uses sin²θ and T uses sin θ.

Warning

Ignoring the sign convention in vertical motion: take upward as positive and downward as negative (or the reverse), but stay consistent. For an upward projectile, g always opposes the initial vertical velocity.

Warning

Thinking uniform circular motion means no acceleration: the direction of velocity keeps changing, so centripetal acceleration is always present and always points inward.

Warning

Omitting the reference frame in relative velocity: write v(AB) as “velocity of A with respect to B”. Mixing up v(AB) and v(BA) reverses the direction of your answer.

Warning

Using the wrong product: work = F · d (dot product, scalar result); torque = r × F (cross product, vector result).

16

Summary: Motion in a Plane Class 11 Notes

Vectors let you split 2D motion into two independent 1D motions. Projectile motion is uniform along x and uniformly accelerated along y, and uniform circular motion has constant speed with an inward centripetal acceleration. Use this checklist from the Motion in a Plane class 11 notes for last-minute revision.

Revision Checklist – Motion in a Plane Class 11 Notes
  • Scalars have magnitude only; vectors have magnitude and direction.
  • Any 2D vector A = Aₓî + Aᵧĵ; resolve before adding or subtracting.
  • Resultant: R = √(A² + B² + 2AB cos θ); |A − B| ≤ R ≤ A + B.
  • Dot product A · B = AB cos θ (scalar); cross product |A × B| = AB sin θ (vector).
  • Velocity v = dr/dt and acceleration a = dv/dt are both vectors.
  • Relative velocity: v(AB) = v(A) − v(B).
  • Projectile: horizontal motion uniform (vₓ = u cos θ); vertical motion uniformly accelerated.
  • R = u² sin 2θ/g; H = u² sin²θ/2g; T = 2u sin θ/g.
  • Maximum range at θ = 45°; complementary angles give equal ranges.
  • Uniform circular motion: speed constant, direction changes; a(c) = v²/r = ω²r, inward.
  • Velocity is tangential and centripetal acceleration is radial; they are always perpendicular.
Download Motion in a Plane Class 11 Notes PDF Free in our study app – use code DOCTOR

Frequently Asked Questions – Motion in a Plane Class 11

What is the difference between distance and displacement in Motion in a Plane?
Distance is the total path length travelled (scalar, always positive). Displacement is the shortest straight-line vector from the initial to the final position. In a plane, displacement has both magnitude and direction. A particle can travel a large distance but have zero displacement if it returns to its starting point.
Why does a projectile follow a parabolic path?
Because horizontal motion is uniform (constant velocity, x proportional to t) while vertical motion is uniformly accelerated (y depends on t²). Substituting t = x/(u cos θ) into the vertical equation eliminates t and gives y as a quadratic function of x, which is the equation of a parabola.
At what angle of projection is the horizontal range maximum?
The horizontal range R = u² sin 2θ / g. Since sin 2θ is maximum when 2θ = 90°, the range is maximum at θ = 45°. At this angle, R(max) = u²/g. For any other angle, the range is less than this maximum.
How is centripetal acceleration different from tangential acceleration?
Centripetal acceleration (ac = v²/r) is always directed towards the centre of the circular path and changes the direction of velocity. Tangential acceleration is directed along the velocity (tangent to the path) and changes the speed. In uniform circular motion, tangential acceleration is zero; only centripetal acceleration exists.
What is the significance of dot and cross products in NEET Physics?
The dot product appears in work (W = F · d = Fd cos θ) and power. The cross product appears in torque (τ = r × F), angular momentum (L = r × p) and magnetic force (F = qv × B). NEET tests these mainly through application: recognising which type of multiplication gives a scalar and which gives a vector.
Can two vectors with unequal magnitudes produce a zero resultant?
No. For the resultant of two vectors to be zero, they must be equal in magnitude and exactly opposite in direction (antiparallel). If their magnitudes differ, no direction can make them cancel completely, so the resultant always has a non-zero magnitude. Three unequal vectors, however, can add up to zero.
Where can I download motion in a plane class 11 notes PDF?
The complete Motion in a Plane class 11 notes PDF is free in our NEET study app. Open the app here and use code DOCTOR.
Where can I practise NEET previous year questions on Motion in a Plane?
You can practise Motion in a Plane NEET previous year questions here, free and with answers. Start with projectile range and height questions, then move to vector resultants and river–boat problems.