
GOC MCQ for NEET below cover the whole chapter, Organic Chemistry: Some Basic Principles and Techniques (GOC), in 30 questions: hybridisation and bonding, IUPAC nomenclature, isomerism, reaction intermediates, nucleophiles and electrophiles, electronic effects, purification methods, and qualitative and quantitative analysis. The questions come from our chapter question bank, and seven of them are actual NEET questions, tagged with the year. The answer key and a short explanation for every question are at the end of the page. If any topic feels shaky, revise the GOC Class 11 notes first, then attempt all 30 before you check.
How to Use These GOC MCQ for NEET
- Attempt all 30 questions first. The answer key and full explanations are at the end of the page, so you can practise without seeing the answers.
- Give yourself about 1 minute per question, and up to 2 minutes for the two numericals at the end.
- For stability questions, don’t guess. Ask which effect is acting (inductive, resonance or hyperconjugation) and in which direction.
- Once you finish, practise the GOC NEET previous year questions to see how NEET has asked this chapter.
Quick Facts to Revise Before You Start
- s-character and electronegativity of carbon: sp (50%) > sp² (33%) > sp³ (25%).
- Homolytic cleavage gives free radicals. Heterolytic cleavage gives carbocations and carbanions.
- Carbocation and free radical stability: 3° > 2° > 1° > methyl. Benzyl and allyl species are extra stable because of resonance.
- A carbocation is sp² and planar. A carbanion is sp³ and pyramidal.
- Nucleophiles donate an electron pair. Electrophiles accept one.
- Hyperconjugation is the delocalisation of σ (C–H) electrons. The more α-hydrogens, the greater the stabilisation.
- Lassaigne’s test: Prussian blue for N, blood red [Fe(SCN)]²⁺ when both N and S are present.
- Kjeldahl: %N = (1.4 × M × 2 × V of H₂SO₄ used) ÷ mass of compound. Dumas: N is collected as N₂ gas.
Bonding and Hybridisation MCQs
1. Which of the following statements is correct?
- (A) π-bonds provide the most reactive centres in molecules containing multiple bonds.
- (B) A carbon atom with an sp hybrid orbital is less electronegative than carbon atoms with sp² or sp³ hybrid orbitals.
- (C) The numbers of σ and π bonds in CH₂=C=CHCH₃ are 7 and 2 respectively.
- (D) A reagent that takes away an electron pair from a reactive site is called a nucleophile.
2. 2-Pentene contains
- (A) 14 σ bonds and one π bond
- (B) 15 σ bonds and one π bond
- (C) 15 σ bonds and two π bonds
- (D) 14 σ bonds and two π bonds
3. Electronegativity of carbon depends on its hybridisation. In which compound is the carbon marked with an asterisk the most electronegative?
- (A) CH₃−CH₂−*CH₂−CH₃
- (B) CH₃−*CH=CH−CH₃
- (C) CH₃−CH₂−C≡*CH
- (D) CH₃−CH₂−CH=*CH₂
4. The numbers of σ bonds, π bonds and lone pairs of electrons in pyridine are, respectively, (NEET 2023)
- (A) 11, 2, 0
- (B) 12, 3, 0
- (C) 11, 3, 1
- (D) 12, 2, 1
IUPAC Nomenclature MCQs
5. The correct decreasing order of priority of functional groups in naming an organic compound by the IUPAC system is
- (A) −COOH > −CONH₂ > −COCl > −CHO
- (B) −SO₃H > −COCl > −CONH₂ > −CN
- (C) −COOH > −COCl > −NH₂ > −C=O
- (D) −COOH > −COOR > −CONH₂ > −COCl
6. Which of the following compounds contains 1°, 2°, 3° and 4° carbon atoms?
- (A) Neopentane
- (B) 2-Methylpentane
- (C) 2,3-Dimethylbutane
- (D) 2,2,3-Trimethylpentane
7. The IUPAC name of ethylidene chloride is
- (A) 1-Chloroethene
- (B) 1-Chloroethyne
- (C) 1,2-Dichloroethane
- (D) 1,1-Dichloroethane
8. The IUPAC name of CH₂(COOH)−C(OH)(COOH)−CH₂COOH (citric acid) is
- (A) 1,2,3-tricarboxy-2,1-propane
- (B) 3-carboxy-3-hydroxy-1,5-pentanedioic acid
- (C) 3-hydroxy-3-carboxy-1,5-pentanedioic acid
- (D) 2-hydroxypropane-1,2,3-tricarboxylic acid
Isomerism MCQs
9. Methoxyethane and propanol are examples of which type of isomerism?
- (A) Chain
- (B) Position
- (C) Functional
- (D) Tautomerism
10. Which of the following is not an isomer of CH₃−CO−CH₂CH₂CH₂CH₃?
- (A) CH₃CH₂OCH=CHCH₂CH₃
- (B) CH₃CH=CHCH₂CH₂CHO
- (C) (CH₃)₂CH−CO−CH₂CH₃
- (D) CH₃CH₂COCH₂CH₂CH₃
11. The compound that shows metamerism is (NEET 2021)
- (A) C₄H₁₀O
- (B) C₅H₁₂
- (C) C₃H₈O
- (D) C₃H₆O
Reaction Intermediates MCQs
12. Which of the following ions is the most stable?
- (A) (CH₃)₃C⁺
- (B) CH₃CH₂CH₂⁺
- (C) CH₃C⁺HCH₂CH₃
- (D) None of these
13. The shape of the methyl carbanion is similar to that of
- (A) NH₃
- (B) BF₃
- (C) methyl free radical
- (D) methyl carbocation
14. The increasing order of stability of the following free radicals is
- (A) (C₆H₅)₂ĊH < (C₆H₅)₃Ċ < (CH₃)₃Ċ < (CH₃)₂ĊH
- (B) (CH₃)₂ĊH < (CH₃)₃Ċ < (C₆H₅)₂ĊH < (C₆H₅)₃Ċ
- (C) (CH₃)₃Ċ < (CH₃)₂ĊH < (C₆H₅)₂ĊH < (C₆H₅)₃Ċ
- (D) (C₆H₅)₃Ċ < (C₆H₅)₂ĊH < (CH₃)₃Ċ < (CH₃)₂ĊH
15. Electrophilic addition reactions take place in two steps, and the first step is the addition of an electrophile. What type of intermediate is formed in the first step of the reaction CH₃−CH=CH₂ + H⁺ → ?
- (A) 2° carbanion
- (B) 1° carbocation
- (C) 2° carbocation
- (D) 1° carbanion
16. In the carbanion CH₃C≡C⁻, the lone pair of electrons is present in which orbital? (NEET 2016)
- (A) 2p
- (B) sp³
- (C) sp²
- (D) sp
Nucleophiles and Electrophiles MCQs
17. Which of the following species does not act as a nucleophile?
- (A) ROH
- (B) ROR
- (C) PCl₃
- (D) BF₃
18. Which of the following pairs are both electrophiles?
- (A) AlCl₃, H₂O
- (B) SO₃, NO₂⁺
- (C) BF₃, H₂O
- (D) NH₃, SO₃
Electronic Effects MCQs
19. The type of delocalisation that involves σ-bond orbitals is called
- (A) inductive effect
- (B) electromeric effect
- (C) hyperconjugation
- (D) mesomeric effect
20. A tertiary butyl carbocation is more stable than a secondary butyl carbocation because of (NEET 2020)
- (A) +R effect of −CH₃ groups
- (B) −R effect of −CH₃ groups
- (C) hyperconjugation
- (D) −I effect of −CH₃ groups
21. What is the correct decreasing order of stability of the following carbocations? I. CH₃−C⁺H−CH₃ II. CH₃−C⁺H−OCH₃ III. CH₃−C⁺H−CH₂−OCH₃
- (A) II > I > III
- (B) II > III > I
- (C) III > I > II
- (D) I > II > III
22. Which series contains only groups that show a −M (mesomeric) effect?
- (A) −NO₂, −CN, −SO₃H
- (B) −Cl, −CHO, −NH₂
- (C) −COR, −OR, −COOR
- (D) −OH, −NR₂, −SR
Purification Methods MCQs
23. In steam distillation, the vapour pressure of the volatile organic compound is
- (A) equal to atmospheric pressure
- (B) double the atmospheric pressure
- (C) less than atmospheric pressure
- (D) more than atmospheric pressure
24. In the soap industry, glycerol is separated from spent lye by
- (A) steam distillation
- (B) fractional distillation
- (C) distillation under reduced pressure
- (D) differential extraction
25. Paper chromatography is an example of (NEET 2020)
- (A) partition chromatography
- (B) thin layer chromatography
- (C) column chromatography
- (D) adsorption chromatography
26. During a court case, a judge suspected that a document had been altered and asked the forensic department to check the ink used at two different places. Which technique would give the best result?
- (A) Column chromatography
- (B) Solvent extraction
- (C) Distillation
- (D) Thin layer chromatography
Qualitative and Quantitative Analysis MCQs
27. Which of the following compounds does not give Lassaigne’s test for nitrogen?
- (A) Urea
- (B) Hydrazine
- (C) Phenylhydrazine
- (D) Azobenzene
28. When both nitrogen and sulphur are present, the Lassaigne’s extract gives a blood red colour with Fe³⁺ due to the formation of (NEET 2023)
- (A) Fe₄[Fe(CN)₆]₃·xH₂O
- (B) NaSCN
- (C) [Fe(CN)₅NOS]⁴⁻
- (D) [Fe(SCN)]²⁺
29. In Kjeldahl’s method, 0.25 g of an organic compound gave enough ammonia to just neutralise 10 cm³ of 0.5 M H₂SO₄. The percentage of nitrogen in the compound is
- (A) 56
- (B) 28
- (C) 14
- (D) 112
30. In Dumas’ method, 0.52 g of an organic compound on combustion gave 68.6 mL of N₂ at 27 °C and 756 mm pressure. What is the percentage of nitrogen in the compound?
- (A) 12.22%
- (B) 14.93%
- (C) 15.84%
- (D) 16.23%
Answer Key
| Q | Ans | Q | Ans | Q | Ans | Q | Ans | Q | Ans |
|---|---|---|---|---|---|---|---|---|---|
| 1 | A | 7 | D | 13 | A | 19 | C | 25 | A |
| 2 | A | 8 | D | 14 | B | 20 | C | 26 | D |
| 3 | C | 9 | C | 15 | C | 21 | A | 27 | B |
| 4 | C | 10 | B | 16 | D | 22 | A | 28 | D |
| 5 | B | 11 | A | 17 | D | 23 | C | 29 | A |
| 6 | D | 12 | A | 18 | B | 24 | C | 30 | B |
Solutions with Explanations
1. (A) π-bonds are weaker and their electrons are more exposed, so they are the most reactive sites. (B) is false: sp carbon has 50% s-character, so it is the most electronegative. (C) is false: CH₂=C=CHCH₃ has 9 σ bonds (3 C–C and 6 C–H) and 2 π bonds. (D) describes an electrophile, not a nucleophile.
2. (A) 14 σ bonds and one π bond CH₃−CH=CH−CH₂−CH₃ has 4 C–C σ bonds and 10 C–H σ bonds, which gives 14 σ bonds, plus one π bond in the double bond.
*3. (C) CH₃−CH₂−C≡CH The marked carbon is sp hybridised, with 50% s-character. The more s-character, the closer the electrons are held to the nucleus, so this carbon is the most electronegative.
4. (C) 11, 3, 1 Pyridine (C₅H₅N) has 6 ring σ bonds and 5 C–H σ bonds, which gives 11 σ bonds. It has 3 π bonds in the aromatic ring and one lone pair on nitrogen.
5. (B) −SO₃H > −COCl > −CONH₂ > −CN The IUPAC priority order is: sulphonic acid > carboxylic acid > ester > acid halide > amide > nitrile > aldehyde > ketone > alcohol > amine.
6. (D) 2,2,3-Trimethylpentane CH₃−C(CH₃)₂−CH(CH₃)−CH₂−CH₃. The CH₃ groups are 1°, the CH₂ is 2°, C3 is 3° and C2 is 4°.
7. (D) 1,1-Dichloroethane Ethylidene chloride is CH₃CHCl₂. Both chlorines are on the same carbon.
8. (D) 2-hydroxypropane-1,2,3-tricarboxylic acid When three or more −COOH groups are attached to a chain, they are named as carboxylic acid substituents of the parent alkane. The parent is propane, with −COOH groups on C1, C2 and C3 and an −OH on C2.
9. (C) Functional CH₃OCH₂CH₃ (an ether) and CH₃CH₂CH₂OH (an alcohol) have the same formula, C₃H₈O, but different functional groups.
10. (B) CH₃CH=CHCH₂CH₂CHO The given compound, hexan-2-one, is C₆H₁₂O. Option B has a C=C as well as a C=O, so its formula is C₆H₁₀O. It has two fewer hydrogens, so it is not an isomer.
11. (A) C₄H₁₀O Metamerism needs a polyvalent atom with alkyl groups that can be distributed differently on either side. C₄H₁₀O forms ethers like C₂H₅−O−C₂H₅ and CH₃−O−C₃H₇, which are metamers.
12. (A) (CH₃)₃C⁺ This is a tertiary carbocation. Its three methyl groups stabilise the positive charge through +I effect and hyperconjugation (9 α-hydrogens).
13. (A) NH₃ In CH₃⁻, carbon is sp³ hybridised with one lone pair, so it is pyramidal, just like NH₃. BF₃, the methyl carbocation and the methyl radical are all planar.
14. (B) (CH₃)₂ĊH < (CH₃)₃Ċ < (C₆H₅)₂ĊH < (C₆H₅)₃Ċ Tertiary radicals are more stable than secondary ones. Radicals on carbons attached to phenyl rings are stabilised by resonance, and the more phenyl rings, the greater the stability.
15. (C) 2° carbocation H⁺ adds to the terminal CH₂ carbon, giving CH₃−C⁺H−CH₃. This is a secondary carbocation, which is more stable than the primary one.
16. (D) sp The carbanion carbon is part of a triple bond, so it is sp hybridised, and its lone pair sits in an sp orbital.
17. (D) BF₃ Boron in BF₃ has only 6 electrons and no lone pair to donate. It accepts an electron pair, so it is an electrophile. ROH, ROR and PCl₃ all have lone pairs.
18. (B) SO₃, NO₂⁺ Both are electron-deficient and accept electron pairs. H₂O and NH₃ have lone pairs and act as nucleophiles.
19. (C) hyperconjugation Hyperconjugation is the delocalisation of σ (C–H) bond electrons of an alkyl group into an adjacent empty p orbital or π system. It is also called σ–π conjugation or no-bond resonance.
20. (C) hyperconjugation The tert-butyl carbocation has 9 α-hydrogens, while the sec-butyl carbocation has 5. More hyperconjugating structures mean greater stability.
21. (A) II > I > III In II, the −OCH₃ group is directly attached to the positive carbon, and its lone pair stabilises the charge by resonance (+R). In III, the −OCH₃ is one carbon away, so it can only withdraw electrons by its −I effect, which destabilises the cation. I has no such group.
22. (A) −NO₂, −CN, −SO₃H All three withdraw electrons from a conjugated system by resonance. −OR, −NH₂, −OH, −NR₂, −SR and −Cl have lone pairs and show +M.
23. (C) less than atmospheric pressure In steam distillation, the mixture boils when the vapour pressure of the organic compound plus that of water equals atmospheric pressure. So the compound boils below its normal boiling point, with its own vapour pressure less than atmospheric.
24. (C) distillation under reduced pressure Glycerol decomposes at or below its normal boiling point. Lowering the pressure lowers its boiling point, so it can be distilled without decomposing.
25. (A) partition chromatography In paper chromatography, water trapped in the paper is the stationary phase. The components separate by partitioning between this water and the moving solvent.
26. (D) Thin layer chromatography TLC needs only a tiny sample, works quickly and separates the dyes in an ink clearly, so two ink samples can be compared side by side.
27. (B) Hydrazine Lassaigne’s test detects nitrogen by converting it into NaCN, which needs both carbon and nitrogen. Hydrazine (NH₂NH₂) has no carbon, so no cyanide forms.
28. (D) [Fe(SCN)]²⁺ When N and S are both present, sodium thiocyanate (NaSCN) forms during fusion. With Fe³⁺, it gives blood red [Fe(SCN)]²⁺.
29. (A) 56 Moles of H₂SO₄ = 0.5 × 10 ÷ 1000 = 0.005 mol. This neutralises 0.010 mol of NH₃, which contains 0.010 × 14 = 0.14 g of N. %N = 0.14 ÷ 0.25 × 100 = 56%
30. (B) 14.93% Convert the N₂ volume to STP: V = 68.6 × (756 ÷ 760) × (273 ÷ 300) = 62.1 mL. Mass of N₂ = 62.1 × 28 ÷ 22,400 = 0.0776 g. %N = 0.0776 ÷ 0.52 × 100 = 14.93%
Topics Students Get Wrong Most Often in This Chapter
- The shape of the carbanion. It is pyramidal (sp³), not planar. Carbocations and free radicals are the planar ones.
- Where −OCH₃ sits. Directly on the charged carbon it stabilises the cation by +R. One carbon away it destabilises the cation by −I. Question 21 tests exactly this.
- Hyperconjugation counts. Count the α-hydrogens. More α-hydrogens means more stability.
- Lassaigne’s test results. Prussian blue for N, blood red for N and S together, and no test for compounds without carbon, such as hydrazine.
- Kjeldahl calculations. H₂SO₄ is dibasic, so 1 mol of H₂SO₄ neutralises 2 mol of NH₃. Students often forget the factor of 2.
Keep Practising
After you finish the GOC MCQ for NEET above, go back to the GOC notes for any topic you got wrong. Then solve the GOC NEET PYQs chapter-wise to see how NEET frames questions on this chapter. The next chapter, Hydrocarbons, uses these concepts in every reaction. For other chapters, see all Class 11 and 12 Chemistry notes.
Frequently Asked Questions
Q: How many questions come from GOC in NEET? A: Usually 2–3 questions directly. GOC concepts like carbocation stability, resonance and inductive effect also appear in questions from Hydrocarbons, Haloalkanes and other organic chapters.
Q: Which topics in GOC are most important for NEET? A: Stability of carbocations, carbanions and free radicals, inductive and resonance effects, hyperconjugation, IUPAC nomenclature, isomerism, and Lassaigne’s test. Kjeldahl and Dumas numericals also appear.
Q: Is GOC the same as the NCERT chapter Organic Chemistry: Some Basic Principles and Techniques? A: Yes. GOC (General Organic Chemistry) is the common name for this Class 11 NCERT chapter.
Q: Are these GOC MCQ for NEET enough on their own? A: They cover every topic in the chapter, but you should also solve the chapter’s previous year questions and practise more stability-order questions, because NEET tests them in many forms.




