Difference Between C3 and C4 Plants for NEET

C3 and C4 plants difference: maize (C4) and wheat (C3) growing side by side in sunlight

The main C3 and C4 plants difference is in how they fix carbon dioxide. C3 plants fix CO₂ directly through the Calvin cycle with the enzyme RuBisCO, and their first stable product is a 3-carbon compound, 3-phosphoglyceric acid (PGA). C4 plants first fix CO₂ with the enzyme PEP carboxylase in their mesophyll cells, forming a 4-carbon compound, oxaloacetic acid (OAA). They then release that CO₂ in their bundle sheath cells for the Calvin cycle. As a result, C4 plants avoid photorespiration and work better in hot, bright conditions.

This page covers every point of difference NEET asks: a full comparison table, both pathways step by step, Kranz anatomy, photorespiration and the energy cost of each pathway. It ends with practice questions. For the full chapter, see the Photosynthesis in Higher Plants Class 11 notes.

C3 and C4 Plants Difference: Comparison Table

Feature C3 plants C4 plants
Primary CO₂ acceptorRuBP (ribulose bisphosphate), a 5-carbon compoundPEP (phosphoenol pyruvate), a 3-carbon compound
Enzyme for first CO₂ fixationRuBisCOPEP carboxylase (PEPcase)
First stable product3-PGA (3-carbon)OAA, oxaloacetic acid (4-carbon)
Number of carboxylationsOne (only the Calvin cycle)Two (in the mesophyll, then the Calvin cycle in the bundle sheath)
Cells where CO₂ is fixedMesophyll cells onlyMesophyll cells first, then bundle sheath cells
Calvin cycle takes place inMesophyll cellsBundle sheath cells
RuBisCO present inMesophyll cellsBundle sheath cells (absent from mesophyll)
Kranz anatomyAbsentPresent
PhotorespirationOccursDoes not occur
Optimum temperatureLowerHigher
Response to high lightSaturate at lower light intensityKeep working well at higher light intensity
CO₂ saturationRespond to increased CO₂; saturation seen only beyond about 450 µL L⁻¹Saturate at about 360 µL L⁻¹
ATP used per glucose18 ATP and 12 NADPH30 ATP and 12 NADPH
ProductivityLower in hot, dry conditionsHigher; better adapted to hot, dry habitats
ExamplesWheat, rice, most plantsMaize, sorghum, sugarcane

How the C3 Pathway Works

The C3 pathway is the Calvin cycle on its own. It takes place in the stroma of chloroplasts in the mesophyll cells and has three stages:

  1. Carboxylation: RuBisCO combines CO₂ with RuBP to form two molecules of 3-PGA. This is the most important step, because it fixes CO₂ into an organic compound.
  2. Reduction: 3-PGA is reduced to carbohydrate using ATP and NADPH from the light reaction.
  3. Regeneration: RuBP is regenerated so the cycle can continue. This step also needs ATP.

To fix one molecule of CO₂, the cycle uses 3 ATP and 2 NADPH. Making one glucose molecule needs six turns of the cycle, so it takes 18 ATP and 12 NADPH.

The pathway is called C3 because its first stable product, 3-PGA, has three carbon atoms.

How the C4 Pathway Works

The C4 pathway is also called the Hatch and Slack pathway. It adds an extra CO₂-concentrating step before the Calvin cycle, and it runs across two cell types:

  1. In the mesophyll cells: PEP (3-carbon) accepts CO₂. The enzyme PEP carboxylase catalyses this step and forms OAA (4-carbon). The mesophyll cells of C4 plants have no RuBisCO.
  2. Moving to the bundle sheath: OAA is converted to other 4-carbon acids, such as malic acid or aspartic acid, which are carried into the bundle sheath cells.
  3. In the bundle sheath cells: The 4-carbon acid is broken down. This releases CO₂ and a 3-carbon molecule.
  4. Calvin cycle: The released CO₂ enters the Calvin cycle, which runs in the bundle sheath cells because that is where RuBisCO is present.
  5. Back to the mesophyll: The 3-carbon molecule (pyruvate) returns to the mesophyll cells and is converted back into PEP, ready to fix more CO₂.

Regenerating PEP uses extra ATP. That is why a C4 plant needs about 30 ATP per glucose, compared with 18 ATP in a C3 plant.

Kranz Anatomy: The Structural Difference

C4 plants have a special leaf anatomy called Kranz anatomy (“Kranz” means wreath). The large bundle sheath cells form a ring around the vascular bundles. These bundle sheath cells:

  • have a large number of chloroplasts,
  • have thick walls that are impervious to gaseous exchange,
  • have no intercellular spaces.

Because the bundle sheath walls don’t let gases through, the CO₂ released inside them stays concentrated around RuBisCO. C3 plants don’t have this ring of specialised bundle sheath cells.

Why C4 Plants Don’t Show Photorespiration

RuBisCO can bind both CO₂ and O₂. When O₂ levels are high compared with CO₂, especially in hot conditions, RuBisCO binds O₂ instead. This produces one molecule of PGA and one of phosphoglycolate, and it releases CO₂. This process is photorespiration. It makes no sugar, no ATP and no NADPH, so it wastes energy.

In C4 plants, the C4 pathway raises the CO₂ concentration at the site of RuBisCO in the bundle sheath. With so much CO₂ around, RuBisCO works as a carboxylase and hardly ever binds O₂. So photorespiration does not occur in C4 plants, and they are more productive. In C3 plants, some O₂ always binds RuBisCO, so photorespiration takes place and less CO₂ is fixed.

Which Is Better: C3 or C4?

Neither is better everywhere. It depends on the habitat:

  • In hot, bright and dry conditions, C4 plants win. They don’t lose carbon to photorespiration, they have a higher temperature optimum, and they keep photosynthesising well in strong light.
  • In cooler conditions with moderate light, C3 plants do well and spend less energy, because they don’t pay the extra ATP cost of regenerating PEP.
  • At higher CO₂ levels, C3 plants benefit more. C4 plants saturate at about 360 µL L⁻¹ of CO₂, while C3 plants keep responding up to about 450 µL L⁻¹ and beyond.

Quick Memory Tricks for NEET

  • “C3 = 3-PGA; C4 = OAA (4 carbons).” The name of each pathway comes from the number of carbon atoms in its first stable product.
  • “C4 fixes CO₂ twice.” First by PEPcase in the mesophyll, then by RuBisCO in the bundle sheath.
  • “No RuBisCO in C4 mesophyll.” This line is a favourite NEET statement question.
  • “C4 = maize, sorghum, sugarcane.” Most tropical grasses are C4.
  • “C4 is more expensive, but more productive.” It uses 30 ATP vs 18 ATP per glucose, but loses nothing to photorespiration.

Practice Questions on C3 and C4 Plants

1. The primary CO₂ acceptor in C4 plants is

  • (A) RuBP
  • (B) PEP
  • (C) OAA
  • (D) PGA

2. In C4 plants, the Calvin cycle takes place in

  • (A) mesophyll cells
  • (B) bundle sheath cells
  • (C) guard cells
  • (D) epidermal cells

3. Which of the following statements about C4 plants is incorrect?

  • (A) They show Kranz anatomy.
  • (B) Their mesophyll cells contain large amounts of RuBisCO.
  • (C) They do not show photorespiration.
  • (D) They have a higher temperature optimum than C3 plants.

4. The first stable product of CO₂ fixation in C3 plants is

  • (A) Oxaloacetic acid
  • (B) Malic acid
  • (C) 3-phosphoglyceric acid
  • (D) Phosphoenol pyruvate

5. Which of the following is a C4 plant?

  • (A) Wheat
  • (B) Rice
  • (C) Maize
  • (D) Pea

Answers

1. (B) PEP. Phosphoenol pyruvate, a 3-carbon compound, accepts CO₂ in the mesophyll cells of C4 plants. OAA is the first product, not the acceptor.

2. (B) Bundle sheath cells. RuBisCO in C4 plants is present only in the bundle sheath cells, so the Calvin cycle runs there.

3. (B). The mesophyll cells of C4 plants lack RuBisCO. They use PEP carboxylase instead.

4. (C) 3-phosphoglyceric acid. It has 3 carbon atoms, which gives the C3 pathway its name.

5. (C) Maize. Wheat, rice and pea are C3 plants.

Keep Practising

After you learn the C3 and C4 plants difference, revise the full Photosynthesis in Higher Plants notes, including the light reaction and photophosphorylation. Then solve the Photosynthesis in Higher Plants NEET PYQs chapter-wise to see how NEET frames C3 and C4 questions. For other chapters, see all Class 11 and 12 Biology notes.

Frequently Asked Questions

What is the main difference between C3 and C4 plants? C3 plants fix CO₂ only through the Calvin cycle, and their first stable product is 3-PGA (3-carbon). C4 plants first fix CO₂ with PEP carboxylase to form OAA (4-carbon) in the mesophyll, then release that CO₂ in the bundle sheath for the Calvin cycle.

Why are C4 plants more efficient than C3 plants? C4 plants concentrate CO₂ around RuBisCO, which stops photorespiration. They also work well at high temperature and in strong light, so in hot climates they make more sugar than C3 plants.

Do C4 plants also have the Calvin cycle? Yes. Every photosynthetic plant uses the Calvin cycle to make sugar. In C4 plants, it runs in the bundle sheath cells instead of the mesophyll cells.

What is Kranz anatomy? Kranz anatomy is the leaf structure of C4 plants. Large bundle sheath cells, with many chloroplasts and thick walls that block gas exchange, form a wreath-like ring around the vascular bundles.

Leave a Reply

Your email address will not be published. Required fields are marked *