01

Introduction to Electrochemistry

These electrochemistry class 12 notes cover how chemical energy and electrical energy turn into each other: galvanic and electrolytic cells, electrode potential and the standard hydrogen electrode, EMF and the Nernst equation, Gibbs energy and equilibrium constant, conductance of electrolytic solutions, Kohlrausch’s law, electrolytic cells, batteries and fuel cells, with Faraday’s laws and corrosion briefly for background. NEET asks steady numericals from this chapter, mostly on E°cell, Nernst, ΔG° and molar conductivity.

Chapter at a glance
  • Core ideas: galvanic and electrolytic cells, electrode potential, SHE, electrochemical series, Nernst equation, conductivity and molar conductivity, Kohlrausch’s law, electrolytic cells, dry cell, lead accumulator, fuel cells
  • Key formulas: E°cell = E°cathode − E°anode; Ecell = E°cell − (0.059/n) log Q; ΔG° = −nFE°cell; Λm = κ × 1000/M
  • Most tested in NEET: E°cell and feasibility, Nernst numericals, ΔG° and K from E°, κ and Λm calculations, Kohlrausch’s law for weak electrolytes, products of electrolysis
  • Free PDF: full chapter notes in our study app (link below)

Electrochemistry is the study of producing electricity from the energy released in spontaneous chemical reactions, and of using electrical energy to bring about non-spontaneous chemical changes. It is built on redox reactions: oxidation and reduction happening at the same time, but at two separate electrodes. Batteries, the extraction of reactive metals, electroplating and the rusting of iron are all electrochemical processes.

Tip

Revise the Redox Reactions chapter of Class 11 first. Every half-reaction and cell equation here uses the same oxidation number and balancing skills.

Key insight: electrochemistry class 12 notes always come back to one question: is the redox reaction spontaneous (a galvanic cell) or forced by a current (an electrolytic cell)?

02

Galvanic and Electrolytic Cells

An electrochemical cell either generates electrical energy from a chemical reaction or uses electrical energy to drive a chemical reaction. The comparison below is the starting point of electrochemistry class 12 notes.

FeatureGalvanic (voltaic) cellElectrolytic cell
Energy conversionChemical to electricalElectrical to chemical
SpontaneitySpontaneous (ΔG < 0)Non-spontaneous (ΔG > 0)
Anode chargeNegative (−)Positive (+)
Cathode chargePositive (+)Negative (−)
Salt bridgeNeeded (two separate half-cells)Usually not needed (one vessel)
ExampleDaniell cell, dry cellElectrolysis of molten NaCl, electroplating
Warning

In both types of cell, oxidation always happens at the anode and reduction at the cathode. Only the signs of the electrodes change between the two.

Key insight: in electrochemistry class 12 notes, remember “anode = oxidation” for every cell, and let the sign follow from whether the cell gives or takes energy.

03

Galvanic Cell: Construction and Working

In a galvanic cell, two half-cells are connected. Each half-cell is a metal electrode dipped in a solution of its own ions. The electrodes are joined by a wire, and the solutions are joined by a salt bridge containing an inert electrolyte such as KCl or KNO3 in agar-agar gel, which completes the circuit and keeps both solutions electrically neutral. The Daniell cell is the standard example in electrochemistry class 12 notes:

Daniell cell
Anode: Zn(s) → Zn²⁺(aq) + 2e⁻ Cathode: Cu²⁺(aq) + 2e⁻ → Cu(s) Cell: Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s), E° = 1.10 V
Zn(s) | Zn²⁺(aq) || Cu²⁺(aq) | Cu(s)

Anode on the left, cathode on the right; a single line shows a phase boundary and a double line shows the salt bridge.

Tip

Remember the acronym LOAN for galvanic cells: Left side, Oxidation, Anode, Negative electrode.

If an external opposing potential is applied to the Daniell cell, the current stops when it equals 1.1 V. If the external potential is more than 1.1 V, the reaction runs backwards and the cell becomes electrolytic: zinc is deposited and copper dissolves.

Key insight: electrochemistry class 12 notes use the Daniell cell for nearly every concept, so learn its half-reactions, notation and E° = 1.10 V by heart.

04

Electrode Potential and Electrochemical Series

Electrode potential is the potential difference that develops between an electrode and its electrolyte. When all species are at unit concentration (gases at 1 bar) and 298 K, it is the standard electrode potential (E°). The potential of a single electrode cannot be measured on its own, so it is measured against a reference: the standard hydrogen electrode (SHE), whose potential is taken as zero. By convention, electrochemistry class 12 notes always use reduction potentials.

SHE: Pt(s) | H₂(g, 1 bar) | H⁺(aq, 1 M), E° = 0.00 V at all temperatures

A platinum electrode coated with platinum black, dipped in acid with pure hydrogen bubbling through it.

Electrochemical Series

Arranging electrodes in order of their standard reduction potentials gives the electrochemical series. It is the main tool for predicting feasibility in electrochemistry class 12 notes.

Half-reaction (reduction)E° (V)Meaning
F2 + 2e− → 2F−+2.87F2 is the strongest oxidising agent
Ag+ + e− → Ag+0.80Ag+ is easily reduced
Cu2+ + 2e− → Cu+0.34Cu is below hydrogen; it does not displace H2 from dilute acids
2H+ + 2e− → H20.00Reference (SHE)
Zn2+ + 2e− → Zn−0.76Zn displaces Cu and H2
Li+ + e− → Li−3.05Li is the strongest reducing agent
  • The more positive the E° value, the stronger the oxidising agent.
  • The more negative the E° value, the stronger the reducing agent.
  • A metal with a lower reduction potential can displace a metal with a higher reduction potential from its salt solution.

Key insight: electrochemistry class 12 notes read the series in one line: top = strong oxidant, bottom = strong reductant, and a species reduces anything above it.

05

EMF and the Nernst Equation

The electromotive force (EMF) is the potential difference between the two electrodes when no current is drawn from the cell. It is calculated using standard reduction potentials of the two electrodes.

EMF calculation
E°cell = E°cathode − E°anode = E°right − E°left Daniell cell: 0.34 − (−0.76) = 1.10 V
Warning

Always use reduction potentials in the formula. If an oxidation potential is given, change its sign to convert it to a reduction potential before calculating E°cell. Never multiply E° by the coefficients when balancing; E° is an intensive property.

Nernst Equation

The Nernst equation relates the electrode or cell potential to the concentrations of the ions. It gives the EMF under non-standard conditions, which is a frequent NEET numerical area in electrochemistry class 12 notes.

Nernst equation (298 K)
Electrode Mⁿ⁺ + ne⁻ → M: E = E° − (0.059/n) log(1/[Mⁿ⁺]) Cell: Ecell = E°cell − (0.059/n) log Q Daniell: Ecell = 1.10 − (0.059/2) log([Zn²⁺]/[Cu²⁺])
At equilibrium: Ecell = 0, so E°cell = (0.059/n) log Kc

General form: E = E° − (2.303RT/nF) log Q, and 2.303RT/F = 0.059 V at 298 K.

Key insight: electrochemistry class 12 notes solve every Nernst problem in three steps: find E°cell, find n and Q from the balanced reaction, then substitute.

06

Gibbs Energy, EMF and Equilibrium Constant

The maximum electrical work a galvanic cell can do equals the decrease in Gibbs energy of the cell reaction. This links electrochemistry class 12 notes directly to thermodynamics and equilibrium.

Thermodynamic link
ΔG = −nFEcell ΔG° = −nFE°cell = −2.303RT log Kc
E°cellΔG°KcReaction
PositiveNegative> 1Spontaneous
ZeroZero= 1At equilibrium
NegativePositive< 1Non-spontaneous
Tip

For the Daniell cell, ΔG° = −2 × 96487 × 1.1 J mol−1 ≈ −212 kJ mol−1. Notice that ΔG° (unlike E°) doubles if the equation is doubled, because n doubles.

Key insight: electrochemistry class 12 notes connect three quantities with one sign rule: positive E°cell means negative ΔG° and K greater than 1.

Read the topic? Try the NEET previous year questions from Electrochemistry next, with answers.

Practice Electrochemistry PYQs
07

Conductance of Electrolytic Solutions

In metals, current is carried by electrons; in electrolytic solutions, it is carried by ions. Electrolytic conductance depends on the nature of the electrolyte, the size and solvation of the ions, the solvent and its viscosity, the concentration, and the temperature. Unlike metallic conduction, electrolytic conductance increases with temperature.

TermSymbol and formulaUnit
ResistanceR = ρl/AΩ
ConductanceG = 1/RS (siemens)
Conductivity (specific conductance)κ = 1/ρ = G*/RS m−1 or S cm−1
Cell constantG* = l/A = κRm−1 or cm−1
Molar conductivityΛm = κ/cS cm2 mol−1 or S m2 mol−1
Λm (S cm² mol⁻¹) = κ (S cm⁻¹) × 1000 / M (mol L⁻¹)

The factor 1000 converts litres to cm³; drop it if κ is in S m⁻¹ and c in mol m⁻³.

The resistance of a solution is measured with a conductivity cell and alternating current (to avoid electrolysis at the electrodes). The cell constant is first found using a KCl solution of known conductivity.

Key insight: electrochemistry class 12 notes keep units straight with one habit: write κ in S cm−1 and M in mol L−1, then multiply by 1000.

08

Variation of Conductivity with Concentration

On dilution, conductivity (κ) decreases, because there are fewer ions per unit volume. Molar conductivity (Λm) increases, because it is the conductance of all the ions from one mole of electrolyte, and that volume now contains more freely moving (or more dissociated) ions. When concentration approaches zero, Λm reaches its limiting value, Λ°m. Electrochemistry class 12 notes treat strong and weak electrolytes separately:

FeatureStrong electrolyte (KCl)Weak electrolyte (CH3COOH)
Rise in Λm on dilutionSlow, due to weaker interionic attractionsSteep at low concentration, due to a large increase in degree of dissociation
Λm vs √c plotNearly a straight lineA curve that rises sharply near zero
Finding Λ°mExtrapolate the line to c = 0Cannot extrapolate; use Kohlrausch’s law
Strong electrolytes (Debye–Hückel–Onsager)
Λm = Λ°m − A√c A depends on the type of electrolyte (1-1, 2-1, 2-2 ...)

Key insight: electrochemistry class 12 notes summarise dilution in one line: κ falls, Λm rises, for both strong and weak electrolytes.

09

Kohlrausch’s Law of Independent Migration

Kohlrausch’s law states that the limiting molar conductivity of an electrolyte is the sum of the limiting molar conductivities of its cation and anion, each multiplied by the number of ions it gives. This is essential for finding Λ°m of weak electrolytes in electrochemistry class 12 notes.

Kohlrausch’s expression
Λ°m = ν₊λ°₊ + ν₋λ°₋ Λ°m(CH₃COOH) = Λ°m(HCl) + Λ°m(CH₃COONa) − Λ°m(NaCl)

Applications

  • Calculating Λ°m of a weak electrolyte from the values for strong electrolytes.
  • Finding the degree of dissociation: α = Λm / Λ°m.
  • Finding the dissociation constant of a weak acid: Ka = cα2 / (1 − α).

Key insight: electrochemistry class 12 notes use Kohlrausch’s law as a combination trick: add and subtract strong electrolytes so that only the ions of the weak electrolyte remain.

10

Electrolytic Cells and Products of Electrolysis

In an electrolytic cell, a current passed through a molten or dissolved electrolyte drives a non-spontaneous redox reaction at the electrodes. Which product forms depends on the state of the electrolyte, the electrodes used and, in water, on the competition between the ions and water itself. Electrochemistry class 12 notes summarise the standard cases:

1 F = 96487 C mol⁻¹ ≈ 96500 C (charge on 1 mol of electrons)

The same Faraday constant appears in ΔG° = −nFE°cell.

Products of Electrolysis

Electrolyte (electrodes)CathodeAnode
Molten NaClNaCl2
Aqueous NaClH2 (water is reduced, not Na+)Cl2 (because of overpotential for O2)
Aqueous CuSO4 (Cu electrodes)Cu depositedCu dissolves as Cu2+
Aqueous CuSO4 (Pt electrodes)Cu depositedO2
Dilute H2SO4H2O2 (S2O82− at higher concentration)

Key insight: electrochemistry class 12 notes predict electrolysis products by comparing reduction potentials, then checking for the overpotential exceptions such as Cl2 from aqueous NaCl.

11

Batteries and Fuel Cells

A battery is a galvanic cell (or a set of cells) in which chemical energy is stored and delivered as electrical energy. Primary cells cannot be recharged once the reaction is complete; secondary cells can be recharged by passing current in the opposite direction. The NEET syllabus names the dry cell, the lead accumulator and fuel cells; the mercury and nickel–cadmium cells are included for background.

CellTypeAnode / cathodeKey point
Dry (Leclanché) cellPrimaryZinc container / carbon rod with MnO2Paste of NH4Cl and ZnCl2; about 1.5 V
Mercury cellPrimaryZinc–mercury amalgam / paste of HgO and carbonConstant 1.35 V; used in hearing aids and watches
Lead storage batterySecondaryPb / grid packed with PbO238% H2SO4; used in vehicles and inverters
Nickel–cadmium cellSecondaryCd / Ni(OH)3Longer life than the lead battery
Lead storage battery (discharge)
Pb + PbO₂ + 2H₂SO₄ → 2PbSO₄ + 2H₂O

Fuel Cells

Fuel cells convert the energy of burning fuels such as hydrogen directly into electricity. The H2–O2 fuel cell, used in the Apollo space programme, has porous carbon electrodes and concentrated aqueous NaOH as electrolyte, and its only product is water.

Anode: 2H₂ + 4OH⁻ → 4H₂O + 4e⁻ | Cathode: O₂ + 2H₂O + 4e⁻ → 4OH⁻

Overall: 2H₂ + O₂ → 2H₂O. Efficiency about 70%, compared with about 40% for thermal power plants.

Key insight: electrochemistry class 12 notes sort cells by one question: can the reaction be reversed by charging? Dry and mercury cells cannot; lead and Ni–Cd cells can.

12

Faraday’s Laws and Corrosion (Background)

Note

Faraday’s laws of electrolysis and corrosion are not listed in the current NEET syllabus. They are kept here briefly for background, so give them the least revision time.

Faraday’s Laws of Electrolysis

  • First law: the mass of substance deposited or liberated at an electrode is directly proportional to the quantity of electricity passed: w = ZIt, where Z is the electrochemical equivalent.
  • Second law: when the same quantity of electricity passes through different electrolytes, the masses of substances liberated are proportional to their chemical equivalent weights (atomic mass ÷ number of electrons needed per ion).

Ag+ + e− → Ag needs 1 F per mole of silver, Cu2+ + 2e− → Cu needs 2 F, and Al3+ + 3e− → Al needs 3 F.

Corrosion: Electrochemical Rusting

The rusting of iron is an electrochemical process in which one spot on the iron acts as the anode and another as the cathode, with water containing dissolved oxygen and CO2 acting as the electrolyte.

Rusting of iron
Anode: 2Fe → 2Fe²⁺ + 4e⁻ (E° = −0.44 V) Cathode: O₂ + 4H⁺ + 4e⁻ → 2H₂O (E° = 1.23 V) Overall: 2Fe + O₂ + 4H⁺ → 2Fe²⁺ + 2H₂O (E° = 1.67 V)

The Fe2+ ions are further oxidised by air to rust, hydrated ferric oxide (Fe2O3·xH2O). Corrosion is prevented by painting, by galvanisation (a zinc coating), or by sacrificial protection with a more reactive metal such as Mg or Zn.

Key insight: electrochemistry class 12 notes for NEET need only the idea behind these topics, so give them the least revision time.

13

How NEET Tests This Chapter

NEET questions from electrochemistry class 12 notes are mostly one-step or two-step numericals, with some statement questions on cells and batteries.

Question typeWhat to do
E°cell and feasibilityE°cathode − E°anode; positive means spontaneous.
Nernst equationFind n and Q from the balanced equation; use 0.059/n.
ΔG° and KΔG° = −nFE°; log K = nE°/0.059.
κ, Λm and cell constantWatch units; use Λm = κ × 1000/M.
Kohlrausch’s lawAdd and subtract strong electrolytes to get the weak one.
Products of electrolysisCompare reduction potentials; check overpotential cases.

The best way to build speed is to practise Electrochemistry NEET PYQs here, free and with answers.

Warning

Common mistakes: multiplying E° by coefficients, taking Q upside down in the Nernst equation, forgetting the factor 1000 in Λm, and saying Na is formed when aqueous NaCl is electrolysed.

Key insight: electrochemistry class 12 notes reward unit discipline; most wrong answers in this chapter are unit or sign slips, not concept gaps.

14

Electrochemistry Class 12 Notes: Summary

Use this checklist for a last revision of electrochemistry class 12 notes before a test.

Revision Checklist – Electrochemistry Class 12 Notes
  • A galvanic cell converts chemical energy to electrical energy; an electrolytic cell does the reverse.
  • Oxidation at the anode, reduction at the cathode, in every cell.
  • EMF: E°cell = E°cathode − E°anode; Daniell cell = 1.10 V.
  • SHE is the reference electrode with E° = 0.00 V.
  • Nernst equation: E = E° − (0.059/n) log Q at 298 K.
  • ΔG° = −nFE°cell = −2.303RT log Kc.
  • κ = G*/R; Λm = κ × 1000/M.
  • On dilution, κ decreases but Λm increases for both strong and weak electrolytes.
  • Kohlrausch’s law gives Λ°m for weak electrolytes; α = Λm/Λ°m.
  • Faraday’s constant F ≈ 96500 C mol−1; aqueous NaCl gives H2 at the cathode and Cl2 at the anode.
  • The lead storage battery is a secondary (rechargeable) cell; the dry cell is primary.
  • The H2–O2 fuel cell produces only water and is about 70% efficient.
Download Electrochemistry Class 12 Notes PDF Free in our study app – use code DOCTOR

Frequently Asked Questions – Electrochemistry Class 12

What is the function of a salt bridge?
The salt bridge completes the electrical circuit by allowing ions to flow between the half-cells, and maintains electrical neutrality by preventing the build-up of charge in the two solutions.
Why does molar conductivity increase with dilution?
For strong electrolytes, interionic attractions decrease with dilution. For weak electrolytes, the degree of dissociation increases sharply, giving many more ions. In both cases, as electrochemistry class 12 notes explain, Λm rises even though κ falls.
Can we store copper sulphate solution in a zinc pot?
No. Zinc is more reactive than copper (it has a lower reduction potential). Zinc will displace copper from the solution (Zn + CuSO4 → ZnSO4 + Cu), and the pot will be eaten away. Electrochemistry class 12 notes use this as a direct application of the electrochemical series.
What is the difference between a primary and a secondary cell?
In primary cells (like dry cells and mercury cells), the reaction occurs only once and they cannot be recharged. Secondary cells (like lead storage batteries and nickel–cadmium cells) can be recharged by passing current in the opposite direction, as electrochemistry class 12 notes describe under batteries.
Under what condition is Ecell = 0?
Ecell becomes zero when the cell reaction reaches chemical equilibrium. At this point the reaction quotient (Q) equals the equilibrium constant (K), and electrochemistry class 12 notes use this to derive E°cell = (0.059/n) log Kc.
Why is hydrogen, not sodium, formed at the cathode in electrolysis of aqueous NaCl?
Water has a much higher (less negative) reduction potential (−0.83 V) than Na+ (−2.71 V), so water is reduced to H2 first. At the anode, Cl2 forms instead of O2 because of the overpotential of oxygen. This is a common trap in electrochemistry class 12 notes.
Where can I download electrochemistry class 12 notes PDF?
The complete electrochemistry class 12 notes PDF is free in our NEET study app. Open the app here and use code DOCTOR to unlock the free study material.
Where can I practise NEET previous year questions on Electrochemistry?
You can practise Electrochemistry NEET PYQs here, free and with answers. Start with E°cell and Nernst equation numericals, then move to ΔG° and K, molar conductivity, Kohlrausch’s law and products of electrolysis.