Introduction to Equilibrium
This equilibrium chemistry class 11 pdf guide covers both chemical and ionic equilibrium, with the concepts and numerical shortcuts you need for NEET. Equilibrium is a state in which the measurable properties of a system, such as concentration, pressure and colour, stop changing with time. In a reversible reaction in a closed system, this happens when the forward and backward reactions run at the same rate.
- Core ideas: dynamic equilibrium, equilibrium constant, Le Chatelier’s principle, acids and bases, pH, buffers and solubility product
- Key formulas: Kp = Kc(RT)^Δn, ΔG° = −RT ln K, pH = −log[H⁺], Ka × Kb = Kw, pH = pKa + log([salt]/[acid]), Ksp = xˣyʸ s^(x+y)
- Most tested in NEET: Kp–Kc relation, direction of shift, pH of acids, bases and salts, buffers, Ksp and solubility
- Free PDF: full chapter notes in our study app (link below)
- Dynamic nature: equilibrium is not static; the forward and backward reactions both continue at the same speed.
- Condition: it can only be reached in a closed system, so that no matter escapes.
Key insight: every topic in this equilibrium chemistry class 11 pdf, from Kc to Ksp, describes one balance between two opposing processes running at equal rates.
Equilibrium in Physical Processes
Physical equilibrium involves a change of state or phase without any change in chemical composition. These equilibria are highly sensitive to temperature and pressure, and they are the natural starting point for any equilibrium chemistry class 11 pdf.
| Type of equilibrium | Process | Example |
|---|---|---|
| Solid ⇌ Liquid | Melting / Freezing | H₂O(s) ⇌ H₂O(l) at 0 °C (273 K) and 1 atm |
| Liquid ⇌ Gas | Evaporation / Condensation | H₂O(l) ⇌ H₂O(g) at 100 °C and 1 atm |
| Solid ⇌ Gas | Sublimation | I₂(s) ⇌ I₂(g); also camphor and NH₄Cl |
| Solid ⇌ Solution | Dissolution / Crystallisation | Sugar(s) ⇌ Sugar(solution) in a saturated solution |
| Gas ⇌ Solution | Dissolution of a gas | CO₂(g) ⇌ CO₂(in solution) in a sealed soda bottle |
Henry’s law
The mass of a gas dissolved in a given mass of solvent at any temperature is proportional to the pressure of the gas above the solvent. This is why a soda bottle fizzes when opened: the pressure drops and dissolved CO₂ escapes until a new equilibrium is reached.
Features of physical equilibria
- Equilibrium is possible only in a closed system at a given temperature.
- Both opposing processes occur at the same rate, so the system is dynamic but stable.
- All measurable properties of the system stay constant.
Key insight: in this equilibrium chemistry class 11 pdf, physical equilibrium is the simplest case of a dynamic balance, with no change in chemical identity.
Equilibrium in Chemical Processes
Reversible reactions are written with a double arrow (⇌). As a reaction proceeds, the forward rate falls as reactants are used up and the backward rate rises as products form. When the two rates become equal, the concentrations stop changing: the system is at chemical equilibrium. This idea runs through the rest of the equilibrium chemistry class 11 pdf.
The dynamic nature of chemical equilibrium was shown using the Haber process. When an equilibrium mixture of N₂, H₂ and NH₃ is repeated with D₂ (deuterium) in place of H₂, the final mixture contains both NH₃ and ND₃. Deuterium ends up in ammonia only because the forward and backward reactions keep going at equilibrium.
Equilibrium can be reached from either side. Starting from reactants or from products gives the same equilibrium mixture at a given temperature.
Key insight: the deuterium experiment in your equilibrium chemistry class 11 pdf is the standard proof that chemical equilibrium is dynamic, not static.
Law of Chemical Equilibrium and Equilibrium Constant
The law of mass action (Guldberg and Waage) states that the rate of a chemical reaction is proportional to the product of the active masses of the reactants, each raised to the power of its stoichiometric coefficient. At equilibrium, this leads to the law of chemical equilibrium: at a given temperature, the ratio below is a constant.
aA + bB ⇌ cC + dD
Kc = [C]ᶜ [D]ᵈ / ([A]ᵃ [B]ᵇ)
For gaseous reactions, partial pressures can be used instead of concentrations, giving Kp. The two constants are related by:
Kp = Kc (RT)^Δn
Δn = moles of gaseous products − moles of gaseous reactants; with pressure in bar, R = 0.0831 bar L mol⁻¹ K⁻¹.
Rules for K
- If Δn = 0, Kp = Kc. If Δn > 0, Kp > Kc. If Δn < 0, Kp < Kc.
- Reversing a reaction gives K’ = 1/K.
- Multiplying a reaction by n gives K’ = Kⁿ.
- Adding two reactions multiplies their constants: K = K₁ × K₂.
- The units of Kc are (mol L⁻¹)^Δn; K is dimensionless when Δn = 0.
Key insight: in your equilibrium chemistry class 11 pdf revision, the Kp–Kc relation and the reverse and multiply rules cover most K-based numericals.
Homogeneous and Heterogeneous Equilibria
In a homogeneous equilibrium, all reactants and products are in the same phase, for example N₂(g) + 3H₂(g) ⇌ 2NH₃(g). In a heterogeneous equilibrium, more than one phase is present, for example CaCO₃(s) ⇌ CaO(s) + CO₂(g).
The active mass for solutions is taken as molar concentration, while for pure solids and pure liquids it is taken as 1 (unity). So for CaCO₃(s) ⇌ CaO(s) + CO₂(g), Kp = p(CO₂) and Kc = [CO₂].
Key insight: this equilibrium chemistry class 11 pdf section matters for one rule only: pure solids and liquids never appear in the K expression.
Applications of the Equilibrium Constant
Predicting the extent of a reaction
| K value | Significance |
|---|---|
| K > 10³ | Products are strongly favoured; the reaction nearly goes to completion. |
| K < 10⁻³ | Reactants are favoured; the reaction barely proceeds. |
| 10⁻³ to 10³ | Both reactants and products are present in significant amounts. |
Predicting the direction: reaction quotient (Q)
The reaction quotient Q uses the same expression as K, but with concentrations at any moment, not necessarily at equilibrium. Comparing Q with K tells you which way the reaction will go.
Q < K → reaction proceeds in the forward direction
Q > K → reaction proceeds in the backward direction
Q = K → the system is at equilibrium
Calculating equilibrium concentrations
Write the balanced equation, set up initial, change and equilibrium amounts in terms of x, substitute into the K expression and solve for x. This ICE-table method is the backbone of NEET numericals in the equilibrium chemistry class 11 pdf.
Key insight: in an equilibrium chemistry class 11 pdf, comparing Q with K is the fastest way to answer any “which direction?” question.
Relation Between K, Q and Gibbs Energy
The Gibbs energy change of a reaction depends on how far it is from equilibrium. At equilibrium, ΔG = 0 and Q = K.
ΔG = ΔG° + RT ln Q
At equilibrium: ΔG° = −RT ln K, so K = e^(−ΔG°/RT)
- ΔG° < 0 → K > 1, so products are favoured.
- ΔG° > 0 → K < 1, so reactants are favoured.
- ΔG° = 0 → K = 1.
Key insight: this equilibrium chemistry class 11 pdf link to thermodynamics is simple: a negative ΔG° always means K is greater than 1.
Factors Affecting Equilibria: Le Chatelier’s Principle
If a system at equilibrium is subjected to a change in concentration, pressure or temperature, the equilibrium shifts in the direction that tends to counteract the effect of the change.
| Change | Direction of shift | Effect on K |
|---|---|---|
| Increase concentration of a reactant | Forward | No change |
| Increase pressure (if Δn ≠ 0) | Towards the side with fewer gaseous moles | No change |
| Add inert gas at constant volume | No shift | No change |
| Increase temperature (endothermic reaction) | Forward | K increases |
| Increase temperature (exothermic reaction) | Backward | K decreases |
| Add a catalyst | No shift | No change |
Adding a catalyst does NOT change the position of equilibrium; it only helps the system reach equilibrium faster by increasing both forward and backward rates equally.
Example: Haber process
For N₂(g) + 3H₂(g) ⇌ 2NH₃(g), ΔH = −92.4 kJ mol⁻¹, the reaction is exothermic and Δn = −2. High pressure and low temperature favour ammonia. In practice, a moderate temperature of about 500 °C and an iron catalyst are used so that equilibrium is reached at a useful rate.
Key insight: in this equilibrium chemistry class 11 pdf, only temperature changes the value of K; every other factor just shifts the position.
Read the topic? Try the NEET previous year questions from Equilibrium next, with answers.
Practice Equilibrium PYQsIonic Equilibrium and Electrolytes
Ionic equilibrium deals with the balance between unionised molecules and ions in solution. This is where acids, bases and salts enter the equilibrium chemistry class 11 pdf notes.
- Strong electrolytes (such as NaCl, HCl, NaOH) ionise almost completely in water (α ≈ 1).
- Weak electrolytes (such as CH₃COOH, NH₄OH) ionise only partly, so an equilibrium is set up between ions and unionised molecules.
The degree of ionisation (α) is the fraction of the total electrolyte that is present as ions at equilibrium.
Key insight: in the equilibrium chemistry class 11 pdf, ionic equilibrium applies the same K ideas to weak electrolytes, because strong ones leave nothing to balance.
Concepts of Acids and Bases
Three definitions of acids and bases appear in equilibrium chemistry class 11 pdf notes, each wider than the one before it.
| Concept | Acid | Base |
|---|---|---|
| Arrhenius | Gives H⁺ (H₃O⁺) in water | Gives OH⁻ in water |
| Brønsted–Lowry | Proton (H⁺) donor | Proton (H⁺) acceptor |
| Lewis | Electron pair acceptor (BF₃, AlCl₃, H⁺) | Electron pair donor (NH₃, OH⁻, H₂O) |
Conjugate acid–base pairs
In the Brønsted–Lowry picture, an acid and the base formed when it loses a proton form a conjugate pair. In HCl + H₂O ⇌ H₃O⁺ + Cl⁻, Cl⁻ is the conjugate base of HCl. A strong acid has a very weak conjugate base, and a weak acid has a relatively strong conjugate base.
Key insight: this equilibrium chemistry class 11 pdf uses the Brønsted–Lowry idea most often, so always identify the conjugate pair first.
Ionisation of Water and the pH Scale
Water ionises slightly: H₂O + H₂O ⇌ H₃O⁺ + OH⁻. In pure water at 298 K, [H₃O⁺] = [OH⁻] = 1.0 × 10⁻⁷ M. Every pH result in the equilibrium chemistry class 11 pdf builds on this value.
pH = −log[H₃O⁺]
pH + pOH = pKw = 14 (at 298 K)
Ionic product of water: Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴ (at 298 K)
Kw increases with temperature, because the ionisation of water is endothermic.
- pH < 7: acidic. pH = 7: neutral. pH > 7: basic (at 298 K).
- A change of 1 pH unit means a tenfold change in [H⁺].
Key insight: the equilibrium chemistry class 11 pdf pH rules hold at 298 K; at higher temperature, neutral water has pH below 7.
Ionisation Constants of Weak Acids and Bases
Weak acids and bases are where most pH numericals in the equilibrium chemistry class 11 pdf come from. For a weak acid HA of concentration C and degree of ionisation α, HA ⇌ H⁺ + A⁻.
Ka = Cα² / (1 − α) ≈ Cα² (when α is small)
α = √(Ka/C) [H⁺] = Cα = √(Ka·C)
pH = ½ (pKa − log C)
A weak base is treated in the same way with Kb, giving [OH⁻] = √(Kb·C).
Ka × Kb = Kw pKa + pKb = 14 (for a conjugate pair at 298 K)
The stronger the acid, the weaker its conjugate base.
Polybasic acids
Acids such as H₂CO₃, H₂S and H₃PO₄ ionise in steps, each with its own constant. Ka₁ > Ka₂ > Ka₃, because it is harder to remove a proton from a negatively charged ion than from a neutral molecule.
Factors affecting acid strength
- Down a group, the H–A bond gets weaker, so acid strength increases: HF < HCl < HBr < HI.
- Across a period, electronegativity of A increases, so acid strength increases: CH₄ < NH₃ < H₂O < HF.
Key insight: in the equilibrium chemistry class 11 pdf, α increases on dilution, which is Ostwald’s dilution law in one line.
Common Ion Effect and Hydrolysis of Salts
Common ion effect
Adding an ion that is already present in an equilibrium shifts the equilibrium back, by Le Chatelier’s principle. Adding CH₃COONa to acetic acid supplies extra CH₃COO⁻, which suppresses the ionisation of CH₃COOH and raises the pH.
Hydrolysis of salts
Ions from a weak acid or a weak base react with water, so a salt solution need not be neutral. Salts of a strong acid and a strong base (such as NaCl) do not hydrolyse and give a neutral solution. The table below is the most compact part of the equilibrium chemistry class 11 pdf to memorise.
| Salt type | Example | Nature | pH |
|---|---|---|---|
| Weak acid + strong base | CH₃COONa | Basic | 7 + ½(pKa + log C) |
| Strong acid + weak base | NH₄Cl | Acidic | 7 − ½(pKb + log C) |
| Weak acid + weak base | CH₃COONH₄ | Depends on Ka and Kb | 7 + ½(pKa − pKb) |
| Strong acid + strong base | NaCl | Neutral | 7 |
Key insight: in the equilibrium chemistry class 11 pdf, a salt’s solution takes the nature of its stronger parent, acid or base.
Buffer Solutions and Henderson Equation
Buffer solutions resist changes in pH when small amounts of acid or base are added, or on dilution. An acidic buffer is a weak acid plus its salt with a strong base, such as CH₃COOH + CH₃COONa (pH about 4.75). A basic buffer is a weak base plus its salt with a strong acid, such as NH₄OH + NH₄Cl (pH about 9.25). Blood is a natural buffer, a real-life example often linked to equilibrium chemistry class 11 pdf notes.
Acidic buffer: pH = pKa + log([Salt]/[Acid])
Basic buffer: pOH = pKb + log([Salt]/[Base])
When [Salt] = [Acid], pH = pKa. Buffering action is greatest here, so choose an acid whose pKa is close to the pH you need.
Key insight: buffer questions in the equilibrium chemistry class 11 pdf reduce to one log term, so check the salt-to-acid ratio first.
Solubility Equilibria and Solubility Product
The solubility product (Ksp) describes the equilibrium between an undissolved, sparingly soluble salt and its ions in a saturated solution. It is the last major topic in the equilibrium chemistry class 11 pdf.
AₓBᵧ(s) ⇌ xAʸ⁺(aq) + yBˣ⁻(aq)
Ksp = [Aʸ⁺]ˣ [Bˣ⁻]ʸ = xˣ yʸ s^(x+y)
| Salt type | Example | Ksp in terms of s |
|---|---|---|
| AB | AgCl, BaSO₄ | s² |
| AB₂ or A₂B | CaF₂, PbI₂, Ag₂CrO₄ | 4s³ |
| AB₃ | Al(OH)₃, Fe(OH)₃ | 27s⁴ |
- If the ionic product Qsp > Ksp, precipitation occurs.
- If Qsp < Ksp, the solution is unsaturated and more salt can dissolve.
- A common ion lowers the solubility of a sparingly soluble salt. For example, passing HCl gas through saturated brine precipitates pure NaCl.
Key insight: in the equilibrium chemistry class 11 pdf, compare Ksp values directly only for salts of the same type; otherwise compare molar solubilities.
How NEET Tests This Chapter
NEET questions from equilibrium chemistry class 11 pdf topics mix quick concepts with short numericals. Most need one formula and one log step.
| Question type | What to use |
|---|---|
| Kp–Kc conversion, units of K | Kp = Kc(RT)^Δn, careful count of gaseous moles |
| Direction of reaction or shift | Q vs K, Le Chatelier’s principle |
| pH of strong or weak acids and bases | pH = −log[H⁺], [H⁺] = √(Ka·C) |
| pH of salt solutions | Hydrolysis formulas |
| Buffer pH | Henderson–Hasselbalch equation |
| Solubility, precipitation, common ion | Ksp = xˣyʸ s^(x+y), Qsp vs Ksp |
| Conceptual and assertion-reason | Catalyst and inert gas effects, conjugate pairs, Lewis acids |
Once the formulas are clear, practise Equilibrium NEET PYQs here, free and with answers.
Key insight: work through the equilibrium chemistry class 11 pdf formulas in the order of this table, from Kp–Kc to Ksp.
Common Mistakes to Avoid
These are the errors that most often cost marks when students revise their equilibrium chemistry class 11 pdf notes in a hurry.
Counting solids and liquids in Δn or in the K expression. Only gaseous species count in Δn for Kp = Kc(RT)^Δn.
Saying that pressure, concentration or a catalyst changes K. Only temperature changes the value of K.
Using pH + pOH = 14 at temperatures other than 298 K, where pKw is different.
Comparing Ksp values of salts of different types (such as AgCl and Ag₂CrO₄) to judge solubility.
Summary: Equilibrium Chemistry Class 11 PDF
Chemical equilibrium is a dynamic balance described by K, shifted by Le Chatelier’s principle and changed in value only by temperature. Ionic equilibrium applies the same ideas to acids, bases, salts, buffers and sparingly soluble salts. Use this checklist from the equilibrium chemistry class 11 pdf for last-minute revision.
- Equilibrium constant K only changes with temperature.
- Catalysts and inert gases at constant volume do not affect K or the equilibrium position.
- Kp = Kc(RT)^Δn, with Δn counting gaseous moles only.
- Q < K forward, Q > K backward, Q = K equilibrium.
- ΔG = ΔG° + RT ln Q; at equilibrium, ΔG° = −RT ln K.
- pH < 7 is acidic, pH = 7 is neutral, pH > 7 is basic (at 298 K).
- Kw = 1.0 × 10⁻¹⁴ at 298 K; Ka × Kb = Kw.
- Strong electrolytes ionise almost completely (α ≈ 1).
- Ostwald’s dilution law: Ka = Cα²/(1 − α) ≈ Cα² for weak electrolytes.
- Common ion effect decreases the degree of dissociation of weak electrolytes.
- Salts containing the ion of a weak acid or weak base hydrolyse; NaCl-type salts do not.
- Ksp = [Aⁿ⁺]ˣ [Bᵐ⁻]ʸ for salt AₓBᵧ.
- Buffering action is maximum when pH = pKa.
Frequently Asked Questions – Equilibrium Class 11
Why are solids excluded from the equilibrium constant expression?
What is the effect of adding an inert gas at constant volume?
How does temperature affect the value of K?
What defines an acidic buffer?
When does precipitation occur in terms of Ksp?
What is the relation between pKa and acid strength?
Where can I download equilibrium chemistry class 11 pdf notes?
Where can I practise NEET previous year questions on Equilibrium?
Balance Your NEET Preparation
Ready to move your rank in the forward direction? Join our expert-led batches and master the toughest topics in Physical Chemistry.






[…] Equilibrium notes […]